+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: IFTTT FEATURE (/showthread.php?tid=9903)
IFTTT FEATURE - Saif Kitany - 10-25-2026
I have A8v3 and H32B.
I want to make a condition by kcs v3 like this :
If the relays 2,4,6,……..,32 in H32B are on, then turn on relay2 in A8v3.
I made a custom protocol 3 like this:
Realy-status-255,170,170,170,170
The router is: TCP Client.
In the IFTTT Condition, i put this:
If “custom protol 3”, Then DO2 ON.
But it didn’t work!!
Is there something i need to correct?
RE: IFTTT FEATURE - admin - 10-26-2026
make sure, your H32B have updated the MESSAGE to TCP. you can test with TCP debug tool to monitor, when H32B relay state changed, whether have TCP message posted.