I tried to install KC868-A128 but I got an error!

[soethu]

INFO ESPHome 2023.12.5
INFO Reading configuration /config/esphome/a128.yaml...
WARNING GPIO5 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-a...pping-pins
WARNING GPIO15 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-a...pping-pins
Failed config

switch.gpio: [source <unicode string>:516]
 
  Pin 0 is used in multiple places.
  platform: gpio
  name: a128-light49
  pin:
    pcf8574: pcf8574_hub_out_4
    number: 0
    mode:
      output: True
      input: False
    inverted: True
  disabled_by_default: False
  restore_mode: ALWAYS_OFF
  interlock_wait_time: 0ms
switch.gpio: [source <unicode string>:644]
 
  Pin 0 is used in multiple places.
  platform: gpio
  name: a128-light65
  pin:
    pcf8574: pcf8574_hub_out_4
    number: 0
    mode:
      output: True
      input: False
    inverted: True
  disabled_by_default: False
  restore_mode: ALWAYS_OFF
  interlock_wait_time: 0ms