06-15-2024, 10:35 PM
our board's KCOM = GND, they are connected together in PCB.
if you want use two system, make sure all use same power supply. if you use two power supply for different board, their "GROUND" should connect together.
AI board's digital input port, if input "0v" means trigger, if input "12v" or "24v" means NOT trigger. (according to use 12v or 24v power supply.)
if you want use two system, make sure all use same power supply. if you use two power supply for different board, their "GROUND" should connect together.
AI board's digital input port, if input "0v" means trigger, if input "12v" or "24v" means NOT trigger. (according to use 12v or 24v power supply.)