Disappointed with this server...

[Amaral989]

The ESP 3.3v is 5v now. 
i can not get ADC to read voltages . This unit just doesn't work like its described. 

[admin]

there are 4 channel ADC input ports, not by ESP32. do you use by home assistant?

[admin]

https://www.kincony.com/forum/showthread.php?tid=1837

[Amaral989]

yes, im using home assistant on raspberry pi module

Why does my 3v (next to IO1) for my ESP is now showing 5v.
it seems like the ESP32 is not working

[admin]

A0,A1 is 0-5v input
A2,A3 is 4-20mA input

integrate to home assistant by MQTT, Nothing to do with esp32.
you should use MQTT integrate to home assistant for these ADC channel.
i think you have used 4 GPIO pins that for ESP32, that 4 pins not for ADC. please see here:
   

[admin]

before use ADC, need to enable "AI autoreport En/Dis" function, so that will auto upload MQTT message or TCP message when analog input value changed.