"KCS" firmware BIN file download

[admin]

Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/kcs-firmware-esp32-board.html

  KC868_A4_V1.0.10.zip (Size: 702.6 KB / Downloads: 477)

  KC868_A6_V1.0.10.zip (Size: 708.37 KB / Downloads: 240)

  KC868_A8_V1.0.10.zip (Size: 711.38 KB / Downloads: 297)

  KC868_A8S_V1.0.10.zip (Size: 718.64 KB / Downloads: 258)

  KC868_A16_V1.0.10.zip (Size: 718.88 KB / Downloads: 245)

  KC868_A32_V1.0.10.zip (Size: 718.94 KB / Downloads: 401)

  KC868_A64_V1.0.10.zip (Size: 718.9 KB / Downloads: 227)

  KC868_A128_V1.0.10.zip (Size: 718.99 KB / Downloads: 194)

  KC868_AI_V1.0.10.zip (Size: 713.21 KB / Downloads: 181)

  KC868_AK_V1.0.10.zip (Size: 702.44 KB / Downloads: 187)

  KC868_E16S_V1.0.10.zip (Size: 718.88 KB / Downloads: 307)

[Isaac639]

Hello,
thank you for this information.
I have a question, I don't understand why the status doesn't change when I cross an input. I have KC868-A8 witch firmware KC868_A8_V1.0.10. 

Thanks!

[admin]

this link of version is new: https://www.kincony.com/forum/showthread.php?tid=2542
you can test with this version, if have problem , leave message.

[Isaac639]

Perfect! Now is working, but, the protocol UDP Client is working? 
I have to send a UDP packet when I click on an input.

Thanks for your great work.

[admin]

now UDP use by your client to send and receive command, not use by INPUT, maybe in furture we will add that, INPUT trigger will send command by UDP / HTTP / TCP way.

[Isaac639]

It would be fantastic.
Thanks.

[admin]

you are welcome.