KC868-A16 home assistant demo configuration.yaml by MQTT

[admin]

Here is KC868-A16 integrate with home assitstant by MQTT via "KCS" v1.0.15 firmware.


  A16-mqtt-home-assistant.txt (Size: 9.33 KB / Downloads: 390)

   
   
   
   

[igurgo]

I pasted this into the yaml file:

mqtt:
  switch:
    - name: output64
      state_topic: "KC868_A64/D4D4DAE11DC0/STATE"
      command_topic: "KC868_A64/D4D4DAE11DC0/SET"
      payload_on: '{"output64":{"value":true}}'
      payload_off: '{"output64":{"value":false}}'
      state_on: true
      state_off: false

After this I can control the output64 from HA.
But I don't see the history and event log in HA.

---

Уже разобрался. Спасибо!

[admin]

do you means you only can't see output64? output1--63 can be seen? or all output can't see history in HA?

[Vittorio]

If I may ask, I would like to inquire whether in a future version, the control of the buzzer will also be exposed via MQTT... it would be very useful; currently, I don't see it in MQTT Explorer. At the moment, I have added the sensors. I'm leaving the example code for anyone interested.
  sensor:
    - name: "ADC-1"
      unique_id: a16-kcs-adc-1
      state_topic: "KC868_E16S/B8D61A5AA69C/STATE"
      value_template: "{{ value_json.adc1.value }}"
      unit_of_measurement: "Unità"
    - name: "ADC-2"
      unique_id: a16-kcs-adc-2
      state_topic: "KC868_E16S/B8D61A5AA69C/STATE"
      value_template: "{{ value_json.adc2.value }}"
      unit_of_measurement: "Unità"
    - name: "ADC-3"
      unique_id: a16-kcs-adc-3
      state_topic: "KC868_E16S/B8D61A5AA69C/STATE"
      value_template: "{{ value_json.adc3.value }}"
      unit_of_measurement: "Unità"
    - name: "ADC-4"
      unique_id: a16-kcs-adc-4
      state_topic: "KC868_E16S/B8D61A5AA69C/STATE"
      value_template: "{{ value_json.adc4.value }}"
      unit_of_measurement: "Unità"
    - name: "Sensor 1 Temperature"
      unique_id: a16-kcs-sensor-1-temperature
      state_topic: "KC868_E16S/B8D61A5AA69C/STATE"
      value_template: "{{ value_json.sensor1.temperature }}"
      unit_of_measurement: "°C"

[admin]

the newest firmware, support control buzzer by MQTT, also support read sensor data by MQTT.
here is protocol document: https://www.kincony.com/forum/showthread.php?tid=3105

[Vittorio]

the newest firmware, support control buzzer by MQTT, also support read sensor data by MQTT.
here is protocol document: https://www.kincony.com/forum/showthread.php?tid=3105

Perfect! I hadn't read this document...Thank you very much.