KC868-ASR ESPHome demo config for home assistant

[admin]

   
esphome:
  name: asr

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "Xqy9f8iJ49cr7o8IWE1sFnG9EAEnxHVYlGUQBdnKE6Q="

ota:
  password: "d13799179d079d89758ad1a0fd1c4560"

wifi:
  ssid: KinCony
  password: a12345678

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Asr Fallback Hotspot"
    password: "KqbpeFnrzcWf"

captive_portal:

i2c:
  sda: 26
  scl: 27
  scan: true
  id: bus_a


switch:
  - platform: gpio
    pin: GPIO19
    name: "asr-relay1"

  - platform: gpio
    pin: GPIO5
    name: "asr-relay2"
 
  - platform: gpio
    pin: GPIO23
    name: "asr-led1" 
 
  - platform: gpio
    pin: GPIO22
    name: "asr-led2" 

  - platform: gpio
    pin: GPIO18
    name: "asr-beep"

binary_sensor:
  - platform: gpio
    pin:
      number: 0
      inverted: true
    name: "asr-button"

dallas:
  - pin: 32
    update_interval: 5s

sensor:
  - platform: dallas
    address: 0x7b062162cfe98128
    name: "asr-t2"
   

  KC868-ASR_ESPHome.txt (Size: 1.1 KB / Downloads: 170)