Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KC868-AP
#1
hi, maybe you can upload firmware bin file with esp KC868-AP
Reply
#2
for "KCS" firmware?
Reply
#3
Not necessarily, the old version is also suitable, you can upload some firmware, because I can't find any information with this board.
Reply
#4
developing new firmware for KC868-AP now, when completed, we will upload here and YouTube channel.
Reply
#5
hi when are you planning to release the firmware? I'm really looking forward to it because dbr I can't turn on the lights in my house?
Reply
#6
"KCS" firmware for KC868-AP will release in furture. now what problem with you? do you use esphome?
Reply
#7
I use the home assistant and I was a little interested in how to sign up for the esp home assistant, but I don't know how to program the kc 868-ap board, because I'm not a programmer. Maybe you could upload some instructions on how to start the board with home assistant.
Reply
#8
you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477
Reply
#9
(04-18-2023, 10:51 PM)admin Wrote: you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477

Hello, I wrote esp32 and started the board with home assistant, but the input switches do not work for me. After that, I need all input 16 channels to work separately and I do not promise to control the rgbw band. It's just that I have 16 individual dimmer switches in groups that need 1-10v control and to work with switches. Maybe you can edit the program to work and upload the corrected file


Attached Files Image(s)
       

.txt   kc868-ap.txt (Size: 5.98 KB / Downloads: 158)
Reply
#10
digital input can't use?
your LOG photo, there is error of PCF8574, maybe have set wrong address, please check.
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)