Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"KCS" v1.0.19 firmware BIN file download
#1
Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/kcs-firmware-esp32-board.html
v1.0.19 improment:
fixed bugs with mqtt
fxied bugs with KC868-A16's digital input sequence.


Attached Files
.zip   KCS_KC868_A4_V1.0.19.zip (Size: 736.8 KB / Downloads: 221)
.zip   KCS_KC868_A6_V1.0.19.zip (Size: 743.89 KB / Downloads: 196)
.zip   KCS_KC868_A8_V1.0.19.zip (Size: 747.82 KB / Downloads: 235)
.zip   KCS_KC868_A8S_V1.0.19.zip (Size: 754.99 KB / Downloads: 194)
.zip   KCS_KC868_A16_V1.0.19.zip (Size: 755.24 KB / Downloads: 255)
.zip   KCS_KC868_A32_V1.0.19.zip (Size: 755.28 KB / Downloads: 186)
.zip   KCS_KC868_A64_V1.0.19.zip (Size: 755.24 KB / Downloads: 171)
.zip   KCS_KC868_A128_V1.0.19.zip (Size: 755.43 KB / Downloads: 184)
.zip   KCS_KC868_AI_V1.0.19.zip (Size: 749.7 KB / Downloads: 181)
.zip   KCS_KC868_AK_V1.0.19.zip (Size: 737.64 KB / Downloads: 175)
.zip   KCS_KC868_E16S_V1.0.19.zip (Size: 755.25 KB / Downloads: 186)
Reply
#2
Photo 
kcs_kc868-a8 firmware v2.2 is very unstable for TCP and UDP protocol communications. often does not connect after successfully sending protocol commands. After restarting it will connect again
Reply
#3
we have tested, it's ok, i suggest you can connect to your another router.
i am using TCP Client mode tested about 10 minutes, sent 500 times, no disconnected.
   
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)