Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"KCS" v2.2.2 firmware BIN file download
#41
which sensor model you are using? do you use DHT11?
you can try to test with thie firmware for KC868-AM

.zip   KCS_KC868_AM_V2.2.3.zip (Size: 746.45 KB / Downloads: 54)
Reply
#42
(06-14-2024, 04:42 AM)admin Wrote: which sensor model you are using? do you use DHT11?
you can try to test with thie firmware for KC868-AM

All Sensors are ds18b20. V2.2.3 does not help. Results are the same.
Reply
#43
take a video of your board how you test, so that can understand your problem. video send to whatsapp number: +86-15381188302
Reply
#44
Don't use  WhatsApp. I have attached two pictures of my configuration. Works fine with ESPHome, but I want to use KCS firmware because I like the extra features it has.

I have noticed in MQTT Explorer that the published MQTT string has an extra comma before "output1".  {,"output1":{"value":true},"sensor1":{"temperature":78.3,"humity":-100.0},"sensor2":{"temperature":78.8,"humity":-100.0},"sensor3":{"temperature":78.6,"humity":-100.0},"sensor4":{"temperature":78.6,"humity":-100.0}}
This seems to affect the JSON format so I don't know if it is supposed to be there or is it a bug in the firmware.
I have circled it in red in the image.


Attached Files Image(s)
           
Reply
#45
ok, i see now, we will check, update firmware.
do you use 3pcs of DS18B20 with 3 GPIOs?
Reply
#46
I have 4 connected.
Reply
#47
test this firmware for KC868-AM, then tell me result.

.zip   KCS_KC868_AM_V2.2.4.zip (Size: 746.37 KB / Downloads: 60)
Reply
#48
You left out the comma between false} and "sensor1"

{"output1":{"value":false}"sensor1":{"temperature":83.3,"humity":-100.0},"sensor2":{"temperature":82.8,"humity":-100.0},"sensor3":{"temperature":82.6,"humity":-100.0},"sensor4":{"temperature":86.9,"humity":-100.0}}
Reply
#49
Are you going to respond to my message about the format error that still exists?
Reply
#50
use this one: 
.zip   KCS_KC868_AM_V2.2.4.zip (Size: 746.33 KB / Downloads: 43)
tested as photo:
   
   

{"output1":{"value":false},"sensor1":{"temperature":28.2,"humity":-100.0},"sensor2":{"temperature":-100.0,"humity":-100.0},"sensor3":{"temperature":-100.0,"humity":-100.0},"sensor4":{"temperature":-100.0,"humity":-100.0}}

if have value -100.0 that means sensor not connected.
Reply


Forum Jump:


Users browsing this thread:
2 Guest(s)