Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4.
#1
Hi
please help, i didnt connect the KC868-A8 bord with arduino app.
When read information from board i receive the picture attached
   
Reply
#2
this is a arudino ADC simple demo source for KC868-A8.
you can open it ,directly to compile and download, test whether work well.

.zip   ADC_INOUT.zip (Size: 842 bytes / Downloads: 83)
Reply
#3
(07-13-2024, 01:38 AM)admin Wrote: this is a arudino ADC simple demo source for KC868-A8.
you can open it ,directly to compile and download, test whether work well.

Hi; the problem is connection between comuputer and KC868-A8 (disabled on com4) but it's working with arduino uno.
Reply
#4
do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip
Reply
#5
   
(07-14-2024, 12:31 AM)admin Wrote: do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip

Yes, usb driver installed and port selected in arduino app.

(07-14-2024, 12:31 AM)admin Wrote: do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip

yes usb driver installed
Reply
#6
whether can download firmware?
Reply
#7
(07-14-2024, 12:33 PM)admin Wrote: whether can download firmware?

hi, You mean by that the flash firmware. yes i finished all prog for the product. Tuya smart is working well locally and remotely 
I want to start programming with arduino app but the is a fail of connection.
Port driver is installed. I think that the arduino app  didn't know the panel as NodeMCU 32s.
Reply
#8
if you can download firmware to A8 board, that means PCB hardware is OK.
you can try to use another computer have a test.
Reply
#9
(07-15-2024, 12:36 AM)admin Wrote: if you can download firmware to A8 board, that means PCB hardware is OK.
you can try to use another computer have a test.

Hi, now it’s working when I re installed the arduino app. Thanks for your support.
As I’m  a starter as programmer with arduino’s app, please tell me the inquired steps to follow, I want to put a program in kc868A8 and kc868A16 to manage input and output ans to have Xbox or tuya also.
FYI: I have a code tuya and it’s working well.
Reply
#10
i suggest you download KCS firmware , then you can use KBOX phone app and Tuya app. it's easy, without any code. Not need to use arduino write code.
here is KCS firmware online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)