AS ESPHome yaml for home assistant

[eyevisions]

Here is mine yaml file now trying to make the speaker a media_player. with the file of filip mine assistant cannot make long answers.

script:
esphome:
name: as
friendly_name: AS
platformio_options:
board_build.flash_mode: dio
on_boot:
- light.turn_on:
id: led_ww
red: 100%
green: 9%
blue: 86%
brightness: 60%
effect: fast pulse
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
sdkconfig_options:
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
CONFIG_AUDIO_BOARD_CUSTOM: "y"

psram:
mode: octal # quad for N8R2 and octal for N16R8
speed: 80MHz

# Enable logging
logger:
hardware_uart: USB_SERIAL_JTAG

# Enable Home Assistant API
api:
encryption:
key: "yourkey"
on_client_connected:
then:
- delay: 50ms
- light.turn_off: led_ww
- micro_wake_word.start:
on_client_disconnected:
then:
- voice_assistant.stop:

ota:
- platform: esphome
password: "yourpassword"

wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
fast_connect: true
reboot_timeout: 10min
power_save_mode: none
ap:
ssid: "Esp32-S3-Wake-Word"
password: "hiplahopla"

captive_portal:

button:
- platform: restart
name: "Restart"
id: but_rest

switch:
- platform: template
id: mute
name: mute
optimistic: true
on_turn_on:
- micro_wake_word.stop:
- voice_assistant.stop:
- light.turn_on:
id: led_ww
red: 100%
green: 0%
blue: 0%
brightness: 100%
effect: Scan Effect 2
- delay: 8s
- light.turn_off:
id: led_ww
- light.turn_on:
id: led_ww
red: 100%
green: 0%
blue: 0%
brightness: 60%
- light.turn_on:
id: led_ww2
red: 100%
green: 0%
blue: 0%
brightness: 60%
on_turn_off:
- micro_wake_word.start:
- light.turn_on:
id: led_ww
red: 0%
green: 100%
blue: 0%
brightness: 100%
effect: Scan Effect
- delay: 8s
- light.turn_off:
id: led_ww
- light.turn_on:
id: led_ww
red: 100%
green: 9%
blue: 86%
brightness: 60%
- light.turn_on:
id: led_ww2
red: 0%
green: 0%
blue: 100%
brightness: 60%


light:
- platform: esp32_rmt_led_strip
id: led_ww
rgb_order: GRB
pin: GPIO15
num_leds: 3
rmt_channel: 0
chipset: ws2812
name: "On Board Light 1"
effects:
- pulse:
- pulse:
name: "Fast Pulse"
transition_length: 0.5s
update_interval: 0.5s
min_brightness: 0%
max_brightness: 100%
- addressable_color_wipe:
- addressable_scan:
name: "Scan Effect" # Aanhalingstekens voor consistentie
move_interval: 300ms
scan_width: 1
- addressable_scan:
name: "Scan Effect 2" # Aanhalingstekens voor consistentie
move_interval: 600ms
scan_width: 1

- platform: esp32_rmt_led_strip
id: led_ww2
rgb_order: RGB
pin: GPIO16
num_leds: 1
rmt_channel: 1
chipset: ws2812
name: "On Board Light 2"
effects:
- pulse:
- pulse:
name: "Fast Pulse"
transition_length: 0.5s
update_interval: 0.5s
min_brightness: 0%
max_brightness: 100%

number:
- platform: template
name: "Speaker Volume"
id: speaker_volume
optimistic: true
min_value: 0.0
max_value: 1.0
step: 0.01
initial_value: 0.6
restore_value: true # Nu correct!
unit_of_measurement: "Volume (%)"
set_action:
- lambda: |-
id(va_speaker).set_volume(x);

# Audio and Voice Assistant Config
i2s_audio:
- id: i2s_in
i2s_lrclk_pin: GPIO3
i2s_bclk_pin: GPIO2
- id: i2s_speaker
i2s_lrclk_pin: GPIO6
i2s_bclk_pin: GPIO7

microphone:
- platform: i2s_audio
id: va_mic
adc_type: external
i2s_din_pin: GPIO4
channel: left
pdm: false
i2s_audio_id: i2s_in
bits_per_sample: 32 bit

speaker:
platform: i2s_audio
id: va_speaker
i2s_audio_id: i2s_speaker
dac_type: external
i2s_dout_pin: GPIO8
channel: mono

micro_wake_word:
on_wake_word_detected:
- voice_assistant.start:
wake_word: !lambda return wake_word;
- light.turn_on:
id: led_ww2
red: 0%
green: 100%
blue: 0%
brightness: 100%
effect: fast pulse
models:
- model: alexa

voice_assistant:
id: va
microphone: va_mic
noise_suppression_level: 2.0
volume_multiplier: 6.0
speaker: va_speaker
on_stt_end:
then:
- light.turn_on:
id: led_ww2
red: 0%
green: 0%
blue: 100%
brightness: 100%
on_error:
- light.turn_on:
id: led_ww
red: 100%
green: 0%
blue: 0%
brightness: 60%
- delay: 2s
- micro_wake_word.start:
on_end:
then:
- light.turn_off: led_ww2
- delay: 2s
- light.turn_on: led_ww2
- wait_until:
not:
voice_assistant.is_running:
- micro_wake_word.start:

[vinster8108]

The ymal fails to compile.

Compiling .pioenvs/as/src/esphome/components/template/switch/template_switch.o
src/esphome/components/psram/psram.cpp:5:10: fatal error: esp_psram.h: No such file or directory

*******************************************************************
* Looking for esp_psram.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_psram.h"
* Web  > https://registry.platformio.org/search?q...sp_psram.h
*
*******************************************************************

#include <esp_psram.h>
          ^~~~~~~~~~~~~
compilation terminated.
*** [.pioenvs/as/src/esphome/components/psram/psram.o] Error 1
========================== [FAILED] Took 4.03 seconds ==========================

[admin]

because esphome is updated, just delete this line: rmt channel: 0
the new yaml file is:

Code:

esphome:
  name: as
  friendly_name: AS
  platformio_options:
    board_build.flash_mode: dio
  on_boot:
    - light.turn_on:
        id: led_ww
        blue: 100%
        brightness: 60%
        effect: fast pulse

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
      CONFIG_AUDIO_BOARD_CUSTOM: "y"
   
psram:
  mode: octal  # quad for N8R2 and octal for N16R8
  speed: 80MHz


# Enable logging
logger:
  hardware_uart: USB_SERIAL_JTAG

# Enable Home Assistant API
api:
  encryption:
    key: "TFpb+pBAvQIS1MVwaA7EoJ2DkpWE+79UvVro7yMyGdU="
  on_client_connected:
        then:
          - delay: 50ms
          - light.turn_off: led_ww
          - micro_wake_word.start:
  on_client_disconnected:
        then:
          - voice_assistant.stop:



ota:
  - platform: esphome
    password: "1245211a05eef56614a2ef5a3f3e971c"

wifi:
  ssid: "KinCony"
  password: "a12345678"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp32-S3-Wake-Word"
    password: "LJfUrdJk3svP"

captive_portal:


button:
  - platform: restart
    name: "Restart"
    id: but_rest

switch:
  - platform: template
    id: mute
    name: mute
    optimistic: true
    on_turn_on:
      - micro_wake_word.stop:
      - voice_assistant.stop:
      - light.turn_on:
          id: led_ww           
          red: 100%
          green: 0%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: led_ww
      - light.turn_on:
          id: led_ww           
          red: 100%
          green: 0%
          blue: 0%
          brightness: 30%
    on_turn_off:
      - micro_wake_word.start:
      - light.turn_on:
          id: led_ww           
          red: 0%
          green: 100%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: led_ww
   
light:
  - platform: esp32_rmt_led_strip
    id: led_ww
    rgb_order: RGB
    pin: GPIO16
    num_leds: 1
    chipset: ws2812
    name: "on board light"
    effects:
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 0%
          max_brightness: 100%
         
         
# Audio and Voice Assistant Config         
i2s_audio:
  - id: i2s_in
    i2s_lrclk_pin: GPIO3  #WS
    i2s_bclk_pin: GPIO2 #SCK
  - id: i2s_speaker
    i2s_lrclk_pin: GPIO6  #LRC
    i2s_bclk_pin: GPIO7 #BLCK

microphone:
  - platform: i2s_audio
    id: va_mic
    adc_type: external
    i2s_din_pin: GPIO4 #SD pin on the INMP441
    channel: left
    pdm: false
    i2s_audio_id: i2s_in
    bits_per_sample: 32 bit
   
speaker:
    platform: i2s_audio
    id: va_speaker
    i2s_audio_id: i2s_speaker
    dac_type: external
    i2s_dout_pin: GPIO8   #  DIN Pin of the MAX98357A Audio Amplifier
    channel: mono

micro_wake_word:
  on_wake_word_detected:
    # then:
    - voice_assistant.start:
        wake_word: !lambda return wake_word;
    - light.turn_on:
        id: led_ww           
        red: 30%
        green: 30%
        blue: 70%
        brightness: 60%
        effect: fast pulse
  models:
    - model: github://esphome/micro-wake-word-models/models/v2/hey_jarvis.json
   
voice_assistant:
  id: va
  microphone: va_mic
  noise_suppression_level: 2.0
  volume_multiplier: 4.0
  speaker: va_speaker
  on_stt_end:
       then:
         - light.turn_off: led_ww
  on_error:
          - micro_wake_word.start: 
  on_end:
        then:
          - light.turn_off: led_ww
          - wait_until:
              not:
                voice_assistant.is_running:
          - micro_wake_word.start: 

it can be compiled.