Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KBOX-Pad for Windows PC or Windows Tablet 10 inch
#9
(04-11-2021, 04:43 AM)admin Wrote: because analog input and temperature data updated when the preset threshold is exceeded. I think you can set a smaller value for threshold. such as analog is 0.1V, temperature is 0.1℃

I am revisiting this issue because I would like to use KBOX-Pad on my PC.  The problem is that I do not receive or see any analog inputs (Connect is "OK").
I noticed that the KBOX-Pad.INI file has no definitions for Analog inputs.  This is a copy of the file:

[NetWork_Config]
IP=192.168.1.XX
Port=4196

;change for your relay controller's IP and Port


COL_IP=192.168.1.XXX
COL_Port=4196

;change for your logical controller's IP and Port

[Title_Config]
Software_title=KC868 Smart Home Control System
CopyRight=Made By KinCony & JAC

[Device_Config]
Light1=IR Beams Reset
Light2=Motions Reset
Light3=Test Valve 1
Light4=Linear Actuator
Light5=RF Lamp 1
Light6=lamp
Light7=power
Light8=screen
Light9=lock
Light10=fan
Light11=garage
Light12=heater
Light13=kettle
Light14=desk lamp
Light15=switch
Light16=moive
Light17=NVR
Light18=computer
Light19=player
Light20=button
Light21=power box
Light22=pump
Light23=router
Light24=scene
Light25=security
Light26=security
Light27=speaker
Light28=TV
Light29=watering
Light30=door
Light31=socket
Light32=humidifier

DI1=Contact S1
DI2=Contact S2
DI3=Motion-West
DI4=Motion-East
DI5=IR Beam-1
DI6=IR Beam-2
DI7=IR Beam-3
DI8=IR Beam-4
DI9=input9
DI10=input10
DI11=input11
DI12=input12
DI13=input13
DI14=input14
DI15=input15
DI16=input16

---nothing else.  Could this be the issue?
James
Reply


Messages In This Thread
RE: KBOX-Pad for Windows PC or Windows Tablet 10 inch - by James Alabama - 10-08-2021, 12:22 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)