"KCS" v3.9.2 firmware BIN file download

[admin]

v3.9.2 improvement:
1. KinCony G1 controller sensor gpio adds options for GPIO13, 14, and 21.
2. Sensor will automatically retry after initialization fails.
3. After the device is powered off, the sensor corresponding to Home Assistant will automatically become unavailable within 5 minutes.
4. After the Sensor device is removed, it will automatically enter the uninitialized state.
5. Fix the problem of repeated reporting of Home assistant MQTT.
6. Sensor initialization retry & Home assistant status support "Unavailable" change

[iozzi_giorgio]

v3.9.2 improvement:
1. KinCony G1 controller sensor gpio adds options for GPIO13, 14, and 21.
2. Sensor will automatically retry after initialization fails.
3. After the device is powered off, the sensor corresponding to Home Assistant will automatically become unavailable within 5 minutes.
4. After the Sensor device is removed, it will automatically enter the uninitialized state.
5. Fix the problem of repeated reporting of Home assistant MQTT.
6. Sensor initialization retry & Home assistant status support "Unavailable" chang

good morning, is the kcs v3.9.2 firmware for a32pro the same for a32?

[admin]

KCS v3 for A32Pro, NOT for A32. they are two different product.