https://www.kincony.com/forum/ Wed, 19 Aug 2026 20:59:14 +0000 MyBB https://www.kincony.com/forum/showthread.php?tid=9663 Fri, 24 Jul 2026 16:00:04 +0800 Armsp0]]> https://www.kincony.com/forum/showthread.php?tid=9663

In the Network tab I set STA mode and enter 2.4Ghz wifi SSID and password (details checked correct). after reboot I do not see the KC868 has joined my WiFi network.

I have attached the serial logger output of boot process for review. Is this the correct bin for my board?


  --- Miniterm on COM9 115200,8,N,1.txt (Size: 6.16 KB / Downloads: 57) ]]>

In the Network tab I set STA mode and enter 2.4Ghz wifi SSID and password (details checked correct). after reboot I do not see the KC868 has joined my WiFi network.

I have attached the serial logger output of boot process for review. Is this the correct bin for my board?


  --- Miniterm on COM9 115200,8,N,1.txt (Size: 6.16 KB / Downloads: 57) ]]> https://www.kincony.com/forum/showthread.php?tid=9653 Wed, 22 Jul 2026 15:57:06 +0800 LoganParker]]> https://www.kincony.com/forum/showthread.php?tid=9653 I'm using the KCS v2 firmware and would like each relay to restore its last state automatically after a power outage. Right now, all relays switch to OFF every time the controller reboots.
Is there a built-in setting in KCS v2 to save the relay state in flash memory and restore it after startup, or does this need to be handled through MQTT or Home Assistant? If anyone has configured this successfully, could you share the required settings or steps?
Thanks!]]> I'm using the KCS v2 firmware and would like each relay to restore its last state automatically after a power outage. Right now, all relays switch to OFF every time the controller reboots.
Is there a built-in setting in KCS v2 to save the relay state in flash memory and restore it after startup, or does this need to be handled through MQTT or Home Assistant? If anyone has configured this successfully, could you share the required settings or steps?
Thanks!]]> https://www.kincony.com/forum/showthread.php?tid=9630 Wed, 15 Jul 2026 20:31:22 +0800 D2K]]> https://www.kincony.com/forum/showthread.php?tid=9630 I'm using the KC868-A6v2, KC868-A16v2, and KC868-A16v3 boards on KCS, which completely meets my needs.
I like the functionality and practicality of these boards,
but the firmware is inconvenient:
1. The lack of a backup mechanism and external editing of IFTTT rules when updating the version or moving to another board.
2. The lack of double-tap and hold inputs in the MQTT protocol.
I understand that these implementations can be implemented on esphome, but I would like to see them developed for KCS as well.
Thank you for your product.]]> I'm using the KC868-A6v2, KC868-A16v2, and KC868-A16v3 boards on KCS, which completely meets my needs.
I like the functionality and practicality of these boards,
but the firmware is inconvenient:
1. The lack of a backup mechanism and external editing of IFTTT rules when updating the version or moving to another board.
2. The lack of double-tap and hold inputs in the MQTT protocol.
I understand that these implementations can be implemented on esphome, but I would like to see them developed for KCS as well.
Thank you for your product.]]> https://www.kincony.com/forum/showthread.php?tid=9508 Thu, 18 Jun 2026 11:14:10 +0800 rosebl22]]> https://www.kincony.com/forum/showthread.php?tid=9508 In KCS v2, can relay states be automatically restored after a power loss and reboot, or do they always start from the default state?
Thanks.]]> In KCS v2, can relay states be automatically restored after a power loss and reboot, or do they always start from the default state?
Thanks.]]> https://www.kincony.com/forum/showthread.php?tid=9290 Sat, 25 Apr 2026 07:01:38 +0800 Borg357]]> https://www.kincony.com/forum/showthread.php?tid=9290
ps.  Also, is there a Mac OS or Linux (or equivalent) version of Flash Download Tool?

Thank you]]>
ps.  Also, is there a Mac OS or Linux (or equivalent) version of Flash Download Tool?

Thank you]]> https://www.kincony.com/forum/showthread.php?tid=9239 Thu, 16 Apr 2026 02:42:16 +0800 maurus44]]> https://www.kincony.com/forum/showthread.php?tid=9239 I am using a KC868-A16 board (REV: 1.6) and I would like to confirm which firmware is correct for this device.
I have been flashing firmware using the ESP32 Flash Download Tool (v3.9.2). So far, I have tested the following firmware versions:

• KCS_A16V3_V3.24.3 → I was not able to access the controller after flashing
  
• KCS_KC868_A16_V2.2.4 → I could access the controller, but the input table was incomplete / partially missing
  

At the moment, I am using:

• KC868_A16_V1.0.10 → this version works, and I can access the controller
  

My question is:
Am I using the correct firmware for KC868-A16 REV: 1.6, or is there a newer recommended version that is fully compatible?
Thank you in advance for your help!]]> I am using a KC868-A16 board (REV: 1.6) and I would like to confirm which firmware is correct for this device.
I have been flashing firmware using the ESP32 Flash Download Tool (v3.9.2). So far, I have tested the following firmware versions:

• KCS_A16V3_V3.24.3 → I was not able to access the controller after flashing
  
• KCS_KC868_A16_V2.2.4 → I could access the controller, but the input table was incomplete / partially missing
  

At the moment, I am using:

• KC868_A16_V1.0.10 → this version works, and I can access the controller
  

My question is:
Am I using the correct firmware for KC868-A16 REV: 1.6, or is there a newer recommended version that is fully compatible?
Thank you in advance for your help!]]> https://www.kincony.com/forum/showthread.php?tid=9228 Sat, 11 Apr 2026 22:51:21 +0800 Klemen]]> https://www.kincony.com/forum/showthread.php?tid=9228
I have a KC868-a4 board, with fimware 2.2.20 installed. I purchased tuya licence and everithing on the board seems to work, except that the board is always offline in tuya app. Already tried several things, multiple resets,... I have no idea, how to set in to online state. Any idea?]]>
I have a KC868-a4 board, with fimware 2.2.20 installed. I purchased tuya licence and everithing on the board seems to work, except that the board is always offline in tuya app. Already tried several things, multiple resets,... I have no idea, how to set in to online state. Any idea?]]> https://www.kincony.com/forum/showthread.php?tid=9205 Fri, 03 Apr 2026 08:15:25 +0800 admin]]> https://www.kincony.com/forum/showthread.php?tid=9205 Fix the issue of insufficient Tuya MQTT resources causing restarts.

  KCS_KC868_A2_V2.2.20.zip (Size: 795.82 KB / Downloads: 322)

  KCS_KC868_A4_V2.2.20.zip (Size: 782.95 KB / Downloads: 287)

  KCS_KC868_A4S_V2.2.20.zip (Size: 806.65 KB / Downloads: 228)

  KCS_KC868_A6_V2.2.20.zip (Size: 780.98 KB / Downloads: 522)

  KCS_KC868_A8_V2.2.20.zip (Size: 789.82 KB / Downloads: 331)

  KCS_KC868_A8M_V2.2.20.zip (Size: 806.24 KB / Downloads: 250)

  KCS_KC868_A8S_V2.2.20.zip (Size: 807.64 KB / Downloads: 270)

  KCS_KC868_A16_V2.2.20.zip (Size: 797.19 KB / Downloads: 537)

  KCS_KC868_A16S_V2.2.20.zip (Size: 807.63 KB / Downloads: 289)

  KCS_KC868_A32_V2.2.20.zip (Size: 787.42 KB / Downloads: 324)

  KCS_KC868_A32M_V2.2.20.zip (Size: 805.37 KB / Downloads: 279)

  KCS_KC868_A64_V2.2.20.zip (Size: 787.34 KB / Downloads: 262)

  KCS_KC868_A128_V2.2.20.zip (Size: 787.19 KB / Downloads: 206)

  KCS_KC868_AG_V2.2.20.zip (Size: 765.28 KB / Downloads: 248)

  KCS_KC868_AI_V2.2.20.zip (Size: 789.63 KB / Downloads: 251)

  KCS_KC868_AIO_V2.2.20.zip (Size: 807.05 KB / Downloads: 261)

  KCS_KC868_AK_V2.2.20.zip (Size: 767.66 KB / Downloads: 228)

  KCS_KC868_AM_V2.2.20.zip (Size: 783.03 KB / Downloads: 229)

  KCS_KC868_AP_V2.2.20.zip (Size: 785.46 KB / Downloads: 271)

  KCS_KC868_ASR_V2.2.20.zip (Size: 762.24 KB / Downloads: 238)

  KCS_KC868_E16S_V2.2.20.zip (Size: 791.98 KB / Downloads: 266)

  KCS_KC868_UAIR_V2.2.20.zip (Size: 768.45 KB / Downloads: 231) ]]> Fix the issue of insufficient Tuya MQTT resources causing restarts.

  KCS_KC868_A2_V2.2.20.zip (Size: 795.82 KB / Downloads: 322)

  KCS_KC868_A4_V2.2.20.zip (Size: 782.95 KB / Downloads: 287)

  KCS_KC868_A4S_V2.2.20.zip (Size: 806.65 KB / Downloads: 228)

  KCS_KC868_A6_V2.2.20.zip (Size: 780.98 KB / Downloads: 522)

  KCS_KC868_A8_V2.2.20.zip (Size: 789.82 KB / Downloads: 331)

  KCS_KC868_A8M_V2.2.20.zip (Size: 806.24 KB / Downloads: 250)

  KCS_KC868_A8S_V2.2.20.zip (Size: 807.64 KB / Downloads: 270)

  KCS_KC868_A16_V2.2.20.zip (Size: 797.19 KB / Downloads: 537)

  KCS_KC868_A16S_V2.2.20.zip (Size: 807.63 KB / Downloads: 289)

  KCS_KC868_A32_V2.2.20.zip (Size: 787.42 KB / Downloads: 324)

  KCS_KC868_A32M_V2.2.20.zip (Size: 805.37 KB / Downloads: 279)

  KCS_KC868_A64_V2.2.20.zip (Size: 787.34 KB / Downloads: 262)

  KCS_KC868_A128_V2.2.20.zip (Size: 787.19 KB / Downloads: 206)

  KCS_KC868_AG_V2.2.20.zip (Size: 765.28 KB / Downloads: 248)

  KCS_KC868_AI_V2.2.20.zip (Size: 789.63 KB / Downloads: 251)

  KCS_KC868_AIO_V2.2.20.zip (Size: 807.05 KB / Downloads: 261)

  KCS_KC868_AK_V2.2.20.zip (Size: 767.66 KB / Downloads: 228)

  KCS_KC868_AM_V2.2.20.zip (Size: 783.03 KB / Downloads: 229)

  KCS_KC868_AP_V2.2.20.zip (Size: 785.46 KB / Downloads: 271)

  KCS_KC868_ASR_V2.2.20.zip (Size: 762.24 KB / Downloads: 238)

  KCS_KC868_E16S_V2.2.20.zip (Size: 791.98 KB / Downloads: 266)

  KCS_KC868_UAIR_V2.2.20.zip (Size: 768.45 KB / Downloads: 231) ]]> https://www.kincony.com/forum/showthread.php?tid=9126 Tue, 17 Mar 2026 03:59:11 +0800 apps4check]]> https://www.kincony.com/forum/showthread.php?tid=9126 Any advice would be greatly appreciated.]]> Any advice would be greatly appreciated.]]> https://www.kincony.com/forum/showthread.php?tid=9109 Mon, 09 Mar 2026 07:00:10 +0800 admin]]> https://www.kincony.com/forum/showthread.php?tid=9109 1. fixed Tuya app temperature can't work with automation bug.

  KCS_KC868_A8_V2.2.19.zip (Size: 789.73 KB / Downloads: 293)

  KCS_KC868_A8M_V2.2.19.zip (Size: 806.05 KB / Downloads: 242)

  KCS_KC868_A8S_V2.2.19.zip (Size: 807.48 KB / Downloads: 307)

  KCS_KC868_A16_V2.2.19.zip (Size: 797.24 KB / Downloads: 329)

  KCS_KC868_A16S_V2.2.19.zip (Size: 807.61 KB / Downloads: 242)

  KCS_KC868_A32_V2.2.19.zip (Size: 787.34 KB / Downloads: 278)

  KCS_KC868_A32M_V2.2.19.zip (Size: 805.27 KB / Downloads: 258)

  KCS_KC868_A64_V2.2.19.zip (Size: 787.27 KB / Downloads: 246)

  KCS_KC868_A128_V2.2.19.zip (Size: 787.15 KB / Downloads: 262)

  KCS_KC868_AG_V2.2.19.zip (Size: 765.22 KB / Downloads: 256)

  KCS_KC868_AI_V2.2.19.zip (Size: 789.59 KB / Downloads: 270)

  KCS_KC868_AIO_V2.2.19.zip (Size: 807.13 KB / Downloads: 256)

  KCS_KC868_AK_V2.2.19.zip (Size: 767.57 KB / Downloads: 243)

  KCS_KC868_AM_V2.2.19.zip (Size: 783.01 KB / Downloads: 254)

  KCS_KC868_AP_V2.2.19.zip (Size: 785.16 KB / Downloads: 264)

  KCS_KC868_ASR_V2.2.19.zip (Size: 762.28 KB / Downloads: 269)

  KCS_KC868_E16S_V2.2.19.zip (Size: 791.95 KB / Downloads: 269)

  KCS_KC868_UAIR_V2.2.19.zip (Size: 768.45 KB / Downloads: 264)

  KCS_KC868_A2_V2.2.19.zip (Size: 795.73 KB / Downloads: 264)

  KCS_KC868_A4_V2.2.19.zip (Size: 782.69 KB / Downloads: 252)

  KCS_KC868_A4S_V2.2.19.zip (Size: 806.4 KB / Downloads: 301)

  KCS_KC868_A6_V2.2.19.zip (Size: 744.52 KB / Downloads: 376) ]]> 1. fixed Tuya app temperature can't work with automation bug.

  KCS_KC868_A8_V2.2.19.zip (Size: 789.73 KB / Downloads: 293)

  KCS_KC868_A8M_V2.2.19.zip (Size: 806.05 KB / Downloads: 242)

  KCS_KC868_A8S_V2.2.19.zip (Size: 807.48 KB / Downloads: 307)

  KCS_KC868_A16_V2.2.19.zip (Size: 797.24 KB / Downloads: 329)

  KCS_KC868_A16S_V2.2.19.zip (Size: 807.61 KB / Downloads: 242)

  KCS_KC868_A32_V2.2.19.zip (Size: 787.34 KB / Downloads: 278)

  KCS_KC868_A32M_V2.2.19.zip (Size: 805.27 KB / Downloads: 258)

  KCS_KC868_A64_V2.2.19.zip (Size: 787.27 KB / Downloads: 246)

  KCS_KC868_A128_V2.2.19.zip (Size: 787.15 KB / Downloads: 262)

  KCS_KC868_AG_V2.2.19.zip (Size: 765.22 KB / Downloads: 256)

  KCS_KC868_AI_V2.2.19.zip (Size: 789.59 KB / Downloads: 270)

  KCS_KC868_AIO_V2.2.19.zip (Size: 807.13 KB / Downloads: 256)

  KCS_KC868_AK_V2.2.19.zip (Size: 767.57 KB / Downloads: 243)

  KCS_KC868_AM_V2.2.19.zip (Size: 783.01 KB / Downloads: 254)

  KCS_KC868_AP_V2.2.19.zip (Size: 785.16 KB / Downloads: 264)

  KCS_KC868_ASR_V2.2.19.zip (Size: 762.28 KB / Downloads: 269)

  KCS_KC868_E16S_V2.2.19.zip (Size: 791.95 KB / Downloads: 269)

  KCS_KC868_UAIR_V2.2.19.zip (Size: 768.45 KB / Downloads: 264)

  KCS_KC868_A2_V2.2.19.zip (Size: 795.73 KB / Downloads: 264)

  KCS_KC868_A4_V2.2.19.zip (Size: 782.69 KB / Downloads: 252)

  KCS_KC868_A4S_V2.2.19.zip (Size: 806.4 KB / Downloads: 301)

  KCS_KC868_A6_V2.2.19.zip (Size: 744.52 KB / Downloads: 376) ]]> https://www.kincony.com/forum/showthread.php?tid=8953 Sun, 18 Jan 2026 08:11:37 +0800 tidek1507]]> https://www.kincony.com/forum/showthread.php?tid=8953
I have A32 PRO board. I used KCS firmware. i'm a beginner with Home assistant and ESP. Today i was trying to integrate this with Home Assistant. I used .yaml file by ESPHome builder in HA, but i didnt know that this erase KCS firmware. Now when i try to flash KCS board didnt response on this. After flash in console i see:

Uploading stub...
Running stub...
Stub running...

is stub and send flash finish


But board didnt work. When I flash .yaml for esp home board is connect with HA, but for now i need KCS firmware, i have to fast repair ligts control by switches, becouse my wife is mad now ;d. 

Can you help me?]]>
I have A32 PRO board. I used KCS firmware. i'm a beginner with Home assistant and ESP. Today i was trying to integrate this with Home Assistant. I used .yaml file by ESPHome builder in HA, but i didnt know that this erase KCS firmware. Now when i try to flash KCS board didnt response on this. After flash in console i see:

Uploading stub...
Running stub...
Stub running...

is stub and send flash finish


But board didnt work. When I flash .yaml for esp home board is connect with HA, but for now i need KCS firmware, i have to fast repair ligts control by switches, becouse my wife is mad now ;d. 

Can you help me?]]> https://www.kincony.com/forum/showthread.php?tid=8897 Sat, 10 Jan 2026 07:26:48 +0800 adroot]]> https://www.kincony.com/forum/showthread.php?tid=8897 I have an older version of the Kincony KC868-A16 board (green). I install KCS version 2.2.17 or 2.2.18 on it. I can login in (www), and set my parameters. Then I add the prepared board to Home Assistant via ESP32. I add a new device, the ESP32, and a yaml file is generated. I copy its contents to Notepad. Then I clear the yaml file and paste the code from the ESP32 for HA website into the board. I replace the key entries with the one from Notepad. OTA, Wi-Fi. The code saves without any errors. I install it via USB. Reboot DC. Plugin ethernet cable. Everything is fine. Home Assistant sees the board and I can control relays, etc. And here's the problem description. But I can't access the board via a browser; it doesn't report its IP address. The board search tool doesn't see it either. But the I/O support in HA works. What am I doing wrong?]]> I have an older version of the Kincony KC868-A16 board (green). I install KCS version 2.2.17 or 2.2.18 on it. I can login in (www), and set my parameters. Then I add the prepared board to Home Assistant via ESP32. I add a new device, the ESP32, and a yaml file is generated. I copy its contents to Notepad. Then I clear the yaml file and paste the code from the ESP32 for HA website into the board. I replace the key entries with the one from Notepad. OTA, Wi-Fi. The code saves without any errors. I install it via USB. Reboot DC. Plugin ethernet cable. Everything is fine. Home Assistant sees the board and I can control relays, etc. And here's the problem description. But I can't access the board via a browser; it doesn't report its IP address. The board search tool doesn't see it either. But the I/O support in HA works. What am I doing wrong?]]> https://www.kincony.com/forum/showthread.php?tid=8815 Thu, 11 Dec 2025 23:37:39 +0800 luke19]]> https://www.kincony.com/forum/showthread.php?tid=8815 I am writing to report an issue with a KC868-A16 board: the firmware fails to upload.
I have strictly followed the procedure detailed in the following guide:https://www.kincony.com/esp32-kcsv2-firmware.html
An explanatory video detailing all the actions I perform is attached to this request.

Details of Troubleshooting Performed
- I have tested the procedure on three different PCs.
- I have tried using both USB 2.0 and USB 3.0 ports.
- The flashing program does not return any error, but the firmware is not uploaded.

Error Message Displayed
The only message that appears in the flashing tool is:

test offset : 0 0x0
case ok

Video of the problem:
https://youtu.be/6Pr5BCM6tB0

Request for Assistance
Could you please provide instructions on how to resolve this problem?

Thank you]]> I am writing to report an issue with a KC868-A16 board: the firmware fails to upload.
I have strictly followed the procedure detailed in the following guide:https://www.kincony.com/esp32-kcsv2-firmware.html
An explanatory video detailing all the actions I perform is attached to this request.

Details of Troubleshooting Performed
- I have tested the procedure on three different PCs.
- I have tried using both USB 2.0 and USB 3.0 ports.
- The flashing program does not return any error, but the firmware is not uploaded.

Error Message Displayed
The only message that appears in the flashing tool is:

test offset : 0 0x0
case ok

Video of the problem:
https://youtu.be/6Pr5BCM6tB0

Request for Assistance
Could you please provide instructions on how to resolve this problem?

Thank you]]> https://www.kincony.com/forum/showthread.php?tid=8795 Mon, 08 Dec 2025 11:01:08 +0800 admin]]> https://www.kincony.com/forum/showthread.php?tid=8795 1. fixed bug Tuya app with SIM7600E 4G GPRS connection.

  KCS_KC868_A2_V2.2.18.zip (Size: 795.32 KB / Downloads: 505)

  KCS_KC868_A4_V2.2.18.zip (Size: 782.06 KB / Downloads: 423)

  KCS_KC868_A4S_V2.2.18.zip (Size: 805.81 KB / Downloads: 349)

  KCS_KC868_A6_V2.2.18.zip (Size: 780.69 KB / Downloads: 611)

  KCS_KC868_A8_V2.2.18.zip (Size: 789.06 KB / Downloads: 478)

  KCS_KC868_A8M_V2.2.18.zip (Size: 805.44 KB / Downloads: 387)

  KCS_KC868_A8S_V2.2.18.zip (Size: 806.91 KB / Downloads: 395)

  KCS_KC868_A16_V2.2.18.zip (Size: 796.59 KB / Downloads: 754)

  KCS_KC868_A16S_V2.2.18.zip (Size: 807.03 KB / Downloads: 446)

  KCS_KC868_A32_V2.2.18.zip (Size: 786.7 KB / Downloads: 395)

  KCS_KC868_A32M_V2.2.18.zip (Size: 804.84 KB / Downloads: 402)

  KCS_KC868_A64_V2.2.18.zip (Size: 786.93 KB / Downloads: 432)

  KCS_KC868_A128_V2.2.18.zip (Size: 786.71 KB / Downloads: 359)

  KCS_KC868_AG_V2.2.18.zip (Size: 764.89 KB / Downloads: 408)

  KCS_KC868_AI_V2.2.18.zip (Size: 789.07 KB / Downloads: 410)

  KCS_KC868_AIO_V2.2.18.zip (Size: 806.4 KB / Downloads: 365)

  KCS_KC868_AK_V2.2.18.zip (Size: 767.24 KB / Downloads: 352)

  KCS_KC868_AM_V2.2.18.zip (Size: 782.17 KB / Downloads: 375)

  KCS_KC868_AP_V2.2.18.zip (Size: 784.65 KB / Downloads: 447)

  KCS_KC868_ASR_V2.2.18.zip (Size: 761.56 KB / Downloads: 391)

  KCS_KC868_E16S_V2.2.18.zip (Size: 791.28 KB / Downloads: 387)

  KCS_KC868_UAIR_V2.2.18.zip (Size: 768.06 KB / Downloads: 355) ]]> 1. fixed bug Tuya app with SIM7600E 4G GPRS connection.

  KCS_KC868_A2_V2.2.18.zip (Size: 795.32 KB / Downloads: 505)

  KCS_KC868_A4_V2.2.18.zip (Size: 782.06 KB / Downloads: 423)

  KCS_KC868_A4S_V2.2.18.zip (Size: 805.81 KB / Downloads: 349)

  KCS_KC868_A6_V2.2.18.zip (Size: 780.69 KB / Downloads: 611)

  KCS_KC868_A8_V2.2.18.zip (Size: 789.06 KB / Downloads: 478)

  KCS_KC868_A8M_V2.2.18.zip (Size: 805.44 KB / Downloads: 387)

  KCS_KC868_A8S_V2.2.18.zip (Size: 806.91 KB / Downloads: 395)

  KCS_KC868_A16_V2.2.18.zip (Size: 796.59 KB / Downloads: 754)

  KCS_KC868_A16S_V2.2.18.zip (Size: 807.03 KB / Downloads: 446)

  KCS_KC868_A32_V2.2.18.zip (Size: 786.7 KB / Downloads: 395)

  KCS_KC868_A32M_V2.2.18.zip (Size: 804.84 KB / Downloads: 402)

  KCS_KC868_A64_V2.2.18.zip (Size: 786.93 KB / Downloads: 432)

  KCS_KC868_A128_V2.2.18.zip (Size: 786.71 KB / Downloads: 359)

  KCS_KC868_AG_V2.2.18.zip (Size: 764.89 KB / Downloads: 408)

  KCS_KC868_AI_V2.2.18.zip (Size: 789.07 KB / Downloads: 410)

  KCS_KC868_AIO_V2.2.18.zip (Size: 806.4 KB / Downloads: 365)

  KCS_KC868_AK_V2.2.18.zip (Size: 767.24 KB / Downloads: 352)

  KCS_KC868_AM_V2.2.18.zip (Size: 782.17 KB / Downloads: 375)

  KCS_KC868_AP_V2.2.18.zip (Size: 784.65 KB / Downloads: 447)

  KCS_KC868_ASR_V2.2.18.zip (Size: 761.56 KB / Downloads: 391)

  KCS_KC868_E16S_V2.2.18.zip (Size: 791.28 KB / Downloads: 387)

  KCS_KC868_UAIR_V2.2.18.zip (Size: 768.06 KB / Downloads: 355) ]]> https://www.kincony.com/forum/showthread.php?tid=8776 Thu, 27 Nov 2025 16:38:08 +0800 admin]]> https://www.kincony.com/forum/showthread.php?tid=8776 1. tuya app sensor data fixed by one decimal.
2. added new server location for tuya app.

  KCS_KC868_A8_V2.2.17.zip (Size: 789.07 KB / Downloads: 373)

  KCS_KC868_A8M_V2.2.17.zip (Size: 805.4 KB / Downloads: 328)

  KCS_KC868_A8S_V2.2.17.zip (Size: 806.88 KB / Downloads: 387)

  KCS_KC868_A16_V2.2.17.zip (Size: 796.59 KB / Downloads: 437)

  KCS_KC868_A16S_V2.2.17.zip (Size: 807.12 KB / Downloads: 416)

  KCS_KC868_A32_V2.2.17.zip (Size: 786.86 KB / Downloads: 353)

  KCS_KC868_A32M_V2.2.17.zip (Size: 804.97 KB / Downloads: 349)

  KCS_KC868_A64_V2.2.17.zip (Size: 786.77 KB / Downloads: 346)

  KCS_KC868_A128_V2.2.17.zip (Size: 786.71 KB / Downloads: 362)

  KCS_KC868_AG_V2.2.17.zip (Size: 764.72 KB / Downloads: 371)

  KCS_KC868_AI_V2.2.17.zip (Size: 789.24 KB / Downloads: 392)

  KCS_KC868_AIO_V2.2.17.zip (Size: 806.51 KB / Downloads: 350)

  KCS_KC868_AK_V2.2.17.zip (Size: 767.24 KB / Downloads: 370)

  KCS_KC868_AM_V2.2.17.zip (Size: 782.17 KB / Downloads: 361)

  KCS_KC868_AP_V2.2.17.zip (Size: 784.66 KB / Downloads: 376)

  KCS_KC868_ASR_V2.2.17.zip (Size: 761.56 KB / Downloads: 352)

  KCS_KC868_E16S_V2.2.17.zip (Size: 791.43 KB / Downloads: 358)

  KCS_KC868_UAIR_V2.2.17.zip (Size: 767.85 KB / Downloads: 352)

  KCS_KC868_A2_V2.2.17.zip (Size: 795.16 KB / Downloads: 400)

  KCS_KC868_A4_V2.2.17.zip (Size: 782.2 KB / Downloads: 376)

  KCS_KC868_A4S_V2.2.17.zip (Size: 805.76 KB / Downloads: 358)

  KCS_KC868_A6_V2.2.17.zip (Size: 780.69 KB / Downloads: 370) ]]> 1. tuya app sensor data fixed by one decimal.
2. added new server location for tuya app.

  KCS_KC868_A8_V2.2.17.zip (Size: 789.07 KB / Downloads: 373)

  KCS_KC868_A8M_V2.2.17.zip (Size: 805.4 KB / Downloads: 328)

  KCS_KC868_A8S_V2.2.17.zip (Size: 806.88 KB / Downloads: 387)

  KCS_KC868_A16_V2.2.17.zip (Size: 796.59 KB / Downloads: 437)

  KCS_KC868_A16S_V2.2.17.zip (Size: 807.12 KB / Downloads: 416)

  KCS_KC868_A32_V2.2.17.zip (Size: 786.86 KB / Downloads: 353)

  KCS_KC868_A32M_V2.2.17.zip (Size: 804.97 KB / Downloads: 349)

  KCS_KC868_A64_V2.2.17.zip (Size: 786.77 KB / Downloads: 346)

  KCS_KC868_A128_V2.2.17.zip (Size: 786.71 KB / Downloads: 362)

  KCS_KC868_AG_V2.2.17.zip (Size: 764.72 KB / Downloads: 371)

  KCS_KC868_AI_V2.2.17.zip (Size: 789.24 KB / Downloads: 392)

  KCS_KC868_AIO_V2.2.17.zip (Size: 806.51 KB / Downloads: 350)

  KCS_KC868_AK_V2.2.17.zip (Size: 767.24 KB / Downloads: 370)

  KCS_KC868_AM_V2.2.17.zip (Size: 782.17 KB / Downloads: 361)

  KCS_KC868_AP_V2.2.17.zip (Size: 784.66 KB / Downloads: 376)

  KCS_KC868_ASR_V2.2.17.zip (Size: 761.56 KB / Downloads: 352)

  KCS_KC868_E16S_V2.2.17.zip (Size: 791.43 KB / Downloads: 358)

  KCS_KC868_UAIR_V2.2.17.zip (Size: 767.85 KB / Downloads: 352)

  KCS_KC868_A2_V2.2.17.zip (Size: 795.16 KB / Downloads: 400)

  KCS_KC868_A4_V2.2.17.zip (Size: 782.2 KB / Downloads: 376)

  KCS_KC868_A4S_V2.2.17.zip (Size: 805.76 KB / Downloads: 358)

  KCS_KC868_A6_V2.2.17.zip (Size: 780.69 KB / Downloads: 370) ]]>