02-09-2026, 04:31 AM
Hi,
I have an existing home automation setup and need your advice please.
I have multiple modules of relays as on the picture below, they are DPDT relays, 12v coil.
32 relays in total that I control with a device I bought online 5 years ago (Arduino with 8x4 (32) outputs), it listens to MQTT brocker on Home Assistant and basically turns the relays ON/OFF, which are controlling all my lights and a few ceiling fans/exhausts.
This device becomes unreliable and freezes from time to time so I need a replacement.
Can you please recommend a Kincony device so I can manage my existing relays.
Thank you.
![[Image: Uc064ce43053f4ff2b135492379cd1dcaH.jpg]](https://ae-pic-a1.aliexpress-media.com/kf/Uc064ce43053f4ff2b135492379cd1dcaH.jpg)
![[Image: Ueaec458ec4e6422a9d74ddec0e10e0f39.jpg]](https://ae-pic-a1.aliexpress-media.com/kf/Ueaec458ec4e6422a9d74ddec0e10e0f39.jpg)
I have an existing home automation setup and need your advice please.
I have multiple modules of relays as on the picture below, they are DPDT relays, 12v coil.
32 relays in total that I control with a device I bought online 5 years ago (Arduino with 8x4 (32) outputs), it listens to MQTT brocker on Home Assistant and basically turns the relays ON/OFF, which are controlling all my lights and a few ceiling fans/exhausts.
This device becomes unreliable and freezes from time to time so I need a replacement.
Can you please recommend a Kincony device so I can manage my existing relays.
Thank you.