+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. (/showthread.php?tid=6060)
kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - katlam - 07-12-2024
Hi
please help, i didnt connect the KC868-A8 bord with arduino app.
When read information from board i receive the picture attached
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - admin - 07-13-2024
this is a arudino ADC simple demo source for KC868-A8.
you can open it ,directly to compile and download, test whether work well.
ADC_INOUT.zip (Size: 842 bytes / Downloads: 372)
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - katlam - 07-13-2024
(07-13-2024, 01:38 AM)admin Wrote: this is a arudino ADC simple demo source for KC868-A8.
you can open it ,directly to compile and download, test whether work well.
Hi; the problem is connection between comuputer and KC868-A8 (disabled on com4) but it's working with arduino uno.
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - admin - 07-14-2024
do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - katlam - 07-14-2024
(07-14-2024, 12:31 AM)admin Wrote: do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip
Yes, usb driver installed and port selected in arduino app.
(07-14-2024, 12:31 AM)admin Wrote: do you have installed USB driver, here is link: https://www.kincony.com/download/CH341SER.zip
yes usb driver installed
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - admin - 07-14-2024
whether can download firmware?
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - katlam - 07-14-2024
(07-14-2024, 12:33 PM)admin Wrote: whether can download firmware?
hi, You mean by that the flash firmware. yes i finished all prog for the product. Tuya smart is working well locally and remotely
I want to start programming with arduino app but the is a fail of connection.
Port driver is installed. I think that the arduino app didn't know the panel as NodeMCU 32s.
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - admin - 07-15-2024
if you can download firmware to A8 board, that means PCB hardware is OK.
you can try to use another computer have a test.
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - katlam - 07-20-2024
(07-15-2024, 12:36 AM)admin Wrote: if you can download firmware to A8 board, that means PCB hardware is OK.
you can try to use another computer have a test.
Hi, now it’s working when I re installed the arduino app. Thanks for your support.
As I’m a starter as programmer with arduino’s app, please tell me the inquired steps to follow, I want to put a program in kc868A8 and kc868A16 to manage input and output ans to have Xbox or tuya also.
FYI: I have a code tuya and it’s working well.
RE: kc868_A8: NodeMCU-32s, 80Mhz, 115200. None. Disabled sur COM4. - admin - 07-20-2024
i suggest you download KCS firmware , then you can use KBOX phone app and Tuya app. it's easy, without any code. Not need to use arduino write code.
here is KCS firmware online guide: https://www.kincony.com/esp32-kcsv2-firmware.html