+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC 868 Server (/showthread.php?tid=7611)
KC 868 Server - ezra@riverviewwoodproducts.com - 02-13-2025
Hello,
KC 868 Server running Home Assistant.
>Can Anyone help me figure out what I need to do so that my Analog sensors update by themselves on my home assistant dashboard Gauge Card.
>It updates only when I turn on an off a output signal. But I want it to just update the sensor by itself every 5 seconds or so. I have a 4-20 ma water level sensor connected to it.
can this be done by a way of pining the server somehow? i haven't had luck with that either.
RE: KC 868 Server - admin - 02-13-2025
KC868-Server no analog input ports. if you want use 4-20mA in home assistant, you can add any kincony board with 4-20mA sensor port, then integrate to home assistant by ESPHome.