+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=72)
+--- Forum: T16M (https://www.kincony.com/forum/forumdisplay.php?fid=73)
+--- Thread: T16M discovery on linux (/showthread.php?tid=7871)
T16M discovery on linux - Kleingy - 03-25-2025
Hello,
I flash m'y T16M with the esp tools in Ubuntu following the procedure I found on the forum.
I put the KCS V3 firmware
But now when I plug the board to my router I am not able to find the ip. The orange led in ethernet port on the board blink. The green one is off.
I can not use the discovery tool, because I am on linux.
Do you have a tool to recommande.
I also search to connect to the wifi Access point. But It does not appear. I read that I have to press a button to re enable the wifi Access point, but which button (I saw dw and reset near antenna), and how to proceed (press before power on, at anytime...).
Thanks for your help
RE: T16M discovery on linux - admin - 03-25-2025
if you can't use discovery tool, after you connect with ethernet cable, you can login your router, check whether have T16M device ip.
do you have downloaded newest firmware v3.8.0? https://www.kincony.com/forum/showthread.php?tid=7783