+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=60)
+--- Forum: B16 (https://www.kincony.com/forum/forumdisplay.php?fid=70)
+--- Thread: B16 password reset (/showthread.php?tid=8743)
B16 password reset - lelik_ku - 11-16-2025
Hello, I try to login to B16 default web UI (http://192.168.4.1/login.html) and enter admin/admin password.
Receive Password incorrect error.
I don't remember if I changed the password, so I need to reset it do default.
Tried to push DL and Reset buttons for 10+ seconds, the device reboots, but admin/admin is still not correct.
Also tried admin without a password, also tried admin/jingkong - still not getting access.
RE: B16 password reset - admin - 11-17-2025
what firmware version you have downloaded?
RE: B16 password reset - lelik_ku - 11-17-2025
(11-17-2025, 02:04 AM)admin Wrote: what firmware version you have downloaded?
My B16 already came with some firmware, I didn't download a new one.
The problem is solved. I had to push longer. I managed to push DL button for more than 15 seconds and it worked, after reboot login/password was admin/admin.
Thanks.
RE: B16 password reset - admin - 11-17-2025
ok. But new B16 controller you should download KCS v3 firmware by USB-C cable firstly.
RE: B16 password reset - lelik_ku - 11-19-2025
(11-17-2025, 06:43 AM)admin Wrote: ok. But new B16 controller you should download KCS v3 firmware by USB-C cable firstly.
And where can I find firmware for B16? I can only see topic for B16M
RE: B16 password reset - admin - 11-19-2025
https://www.kincony.com/forum/showthread.php?tid=8687
chose B16
RE: B16 password reset - lelik_ku - 11-26-2025
(11-19-2025, 10:59 PM)admin Wrote: https://www.kincony.com/forum/showthread.php?tid=8687
chose B16
Thanks.
Successfully updated from 3.11 to 3.15 with:
Code:
esptool --chip esp32-s3 --port /dev/ttyACM0 write-flash 0x0 KCS_B16_V3.15.0.bin