+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A2 (https://www.kincony.com/forum/forumdisplay.php?fid=43)
+--- Thread: LAN8720 DHCP implementaion with mqtt arduino source code (/showthread.php?tid=8880)
LAN8720 DHCP implementaion with mqtt arduino source code - jcyu5662 - 01-04-2026
Hi.
I bought KC868-A2 board.
I am tryning to send mqtt message to the mqtt broker through LAN8720 with dhcp configuration.
Any example arduino code on this.
Many Thanks for this wonderfull board. Nice Work!!!
RE: LAN8720 DHCP implementaion with mqtt arduino source code - admin - 01-04-2026
you can download KCS v2 firmware, enable MQTT, then you can directly to use it.
if you want write your own arduino code, here is LAN8720A arduino demo code: https://www.kincony.com/forum/showthread.php?tid=2638
you can add some mqtt code based on it.