KC868-E8T with manual control switch panel and energy meter monitor

[admin]

KC868-E8T manual control relay by wall switch panel and use Tuya app remote control relay and remote monitor energy meter.
   

[vincen]

Can you share please the GPIO uses for the ESP32 ? and also do you have an ESPHome sample sketch for that board ?

Thanks

[admin]

all our ESP32 board support ESPHome.
here is GPIO for KC868-E8T: https://www.kincony.com/forum/showthread.php?tid=2359
here is ESPHome config yaml file for KC868-E8T: https://www.kincony.com/forum/showthread.php?tid=2360

[vincen]

all our ESP32 board support ESPHome.
here is GPIO for KC868-E8T: https://www.kincony.com/forum/showthread.php?tid=2359
here is ESPHome config yaml file for KC868-E8T: https://www.kincony.com/forum/showthread.php?tid=2360

Thanks for links and it should be all good  As you don't share schematics of the board can you confirm USB port is usable to flash the ESP32 ?

[admin]

here is schematic for KC868-E8T: https://www.kincony.com/download/KC868-E...ematic.pdf
all schematic can download from : https://www.kincony.com/document

[vincen]

here is schematic for KC868-E8T: https://www.kincony.com/download/KC868-E...ematic.pdf
all schematic can download from : https://www.kincony.com/document

Thanks for all

[admin]

you are welcome.