connecting sensors to the KC868-A16S module

[Lamri]

Hello, I am having trouble connecting sensors to the KC868-A16S module. Can you please send me a wiring diagram for the following sensors: 
1- A 220v motion detector PIR with 3 wires on the KC868-A16S module. (Can I connect the output of the 220v sensor with the dry contact input of the KC868-A16S module?)
2- A water level sensor XKC-Y25-V PNP with 4 wires. 
3- A water level sensor XKC-Y25-V NPN with 4 wires. 
4- A gas leak alarm sensor 4 wires . 
5- A smoke detector 4 wires .

[admin]

where you buy from the sensors?
post your sensor details, we need to know every wire define for sensor.

[Lamri]

1- A water level sensor XKC-Y25-V PNP with 4 wires.
2- A water level sensor XKC-Y25-V NPN with 4 wires.

https://fr.aliexpress.com/item/100500261...0710272%21



3- A 220v motion detector PIR with 3 wires

https://fr.aliexpress.com/item/100500548...pt=glo2fra



4- A gas leak alarm sensor 4 wires

https://fr.aliexpress.com/item/329819373...pt=glo2fra



5- A smoke detector 4 wires .

https://fr.aliexpress.com/item/100500568...pt=glo2fra

[Lamri]

can someone help me?

[Lamri]

can someone help me ?

[admin]

item 1-2: water level sensor you can connect to A16S' digital input port.
item 3: motion detector can't use, it's AC220v version, it connect with AC220v lamp directly. you should chose dry contact output siganl version of PIR.
itme4: gas leak sensor: "relay output" of sensor connect to A16S' digital input port.
item5: not seen any pin define of the sensor, if the sensor have wire sigal output by "dry contact", also can use for A16S' digital input port.