KCS firmware bugs

[acztassi]

Hello..
I’m having all these problems …
Tested in A16, A128 and AIO
All problems persists…

It’s being complicated

[admin]

timer issue, we will test when have free time.

[admin]

can you test timer by this way:
1. download the latest v2.2.13 firmware: https://www.kincony.com/forum/showthread.php?tid=8058

2. After power on, the firmware time zone remains at UTC-0

3.Record the Board Time of the current firmware homepage, such as 10:20:36 on May 8, 2025

4. Configure a Timer process in IFTTT, where IF uses Timer and sets it to UTC-0 time (1-2 minutes longer than step 3, such as 10:22), THEN is set to toggle a certain DO, and ensure that the IFTTT enable option is enabled

5. Return to the IFTTT list page, click the green button 'run', and observe if the DO is toggled normally.

6. Manually restart the board

7. After waiting for the time set in step 4 to arrive, observe whether IFTTT is working.