kc-868 AK

[Saif Kitany]

I set this condition in KC-868 AK, the IF is time condition and THEN is protocol1+protocol2+protocol3+protocol4.

The protocols programed to tuggle Relay in H32B:

Protocol1—-> toggle relay 21
Protocol2—-> toggle relay 22
Protocol 3—-> toggle relay 23
Protocol 4——> toggle relay 24


But the problem i faced, is when i run the condition, it just operates the protocols in the first line, which is protocol1+protocol2.

Protocol 3 and 4 are not operating!!!

What i miss in the case?

[admin]

post your 4 protocol content screen photo. how you define.

[Saif Kitany]

Protocols content photo:

[admin]

between every THEN protocol action, add delay time, such as 1 second.

[Saif Kitany]

I added delay 1s like in the picture, and i see it’s working well.

Now the strange part is, without adding delay, i face the problem that i described in the beginning with H32B, and also A32pro.

But with A8v3 it works well(even without delay)!!!


Can you explain what is going here?

[admin]

A8v3 use by ESP32S3, the CPU is faster than H32B's CPU.
but add delay is a stable way.