07-01-2025, 04:55 PM
Hello guys,
I have a problem with connecting KinCony KC868-A16v3 with scd41. How can I connect these devices to make HomeAssistant read the sensor data?
its testing platform.
Below are my settings:
I have a problem with connecting KinCony KC868-A16v3 with scd41. How can I connect these devices to make HomeAssistant read the sensor data?
its testing platform.
Below are my settings:
Code:
esphome:
name: test-104
platform: ESP32
board: esp32dev
# Example configuration entry for ESP32
i2c:
- id: bus_a
sda: 9
scl: 10
scan: true
frequency: 400kHz
# Example configuration entry
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO17_OUT
phy_addr: 0
# Optional manual IP
manual_ip:
static_ip: 192.XXXXXXX
gateway: 192.XXXXXX
subnet: 255.XXXXX
# Example configuration entry
pcf8574:
- id: 'pcf8574_hub_out_1' # for output channel 1-8
address: 0x24
- id: 'pcf8574_hub_out_2' # for output channel 9-16
address: 0x25
- id: 'pcf8574_hub_in_1' # for input channel 1-8
address: 0x21
- id: 'pcf8574_hub_in_2' # for input channel 9-16
address: 0x22
# Individual outputs
switch:
- platform: gpio
name: "ESP_Switch_401"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_402"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 1
number: 1
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_403"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 2
number: 2
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_404"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 3
number: 3
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_405"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 4
number: 4
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_406"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 5
number: 5
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_407"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 6
number: 6
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_408"
pin:
pcf8574: pcf8574_hub_out_1
# Use pin number 7
number: 7
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_409"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_410"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 1
number: 1
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_411"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 2
number: 2
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_412"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 3
number: 3
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_413"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 4
number: 4
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_414"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 5
number: 5
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_415"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 6
number: 6
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "ESP_Switch_416"
pin:
pcf8574: pcf8574_hub_out_2
# Use pin number 7
number: 7
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
binary_sensor:
- platform: gpio
name: "ESP_Sensor_401"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_402"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 1
number: 1
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_403"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 2
number: 2
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_404"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 3
number: 3
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_405"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 4
number: 4
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_406"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 5
number: 5
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_407"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 6
number: 6
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_408"
pin:
pcf8574: pcf8574_hub_in_2
# Use pin number 7
number: 7
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_409"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_410"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 1
number: 1
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_411"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 2
number: 2
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_412"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 3
number: 3
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_413"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 4
number: 4
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_414"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 5
number: 5
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_415"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 6
number: 6
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
- platform: gpio
name: "ESP_Sensor_416"
pin:
pcf8574: pcf8574_hub_in_1
# Use pin number 7
number: 7
# One of INPUT or OUTPUT
mode: INPUT
inverted: true
one_wire:
- platform: gpio
pin: GPIO14
sensor:
- platform: dallas_temp
address: 0x803c8504578d3328
name: "Temp_4X1"
update_interval: 5s
# Enable logging
logger:
# Enable Home Assistant API
api: