03-18-2025, 09:08 AM
Hello,
1-2: I was referring to the maximum load per relay. Please correct me if I am wrong but iwith 7A with 220v (AC single phase) that will be a maximum of 1540W load. My real load will be a 2 or 3 LED bulb light that are around 20W each. Is that a safe usecase scenario for B16 relays?
3. Ok so a contactor is required. Thank you.
4. KC868-A16v3 and B16 will be sitting in different physical locations of the house and I was wondering if I could connect a light switch to B16 digital input to control a relay on the KC868-A16v3. If that is not possible what extension board can I use to have more digital inputs for KC868-A16v3 or B16?
5. Thank you.
6. If I would like to have also lights dimming capabilities on the lights controlled by KC868-A16v3 what boards/setup could I use from Kincony?
Thanks,
Erazer
1-2: I was referring to the maximum load per relay. Please correct me if I am wrong but iwith 7A with 220v (AC single phase) that will be a maximum of 1540W load. My real load will be a 2 or 3 LED bulb light that are around 20W each. Is that a safe usecase scenario for B16 relays?
3. Ok so a contactor is required. Thank you.
4. KC868-A16v3 and B16 will be sitting in different physical locations of the house and I was wondering if I could connect a light switch to B16 digital input to control a relay on the KC868-A16v3. If that is not possible what extension board can I use to have more digital inputs for KC868-A16v3 or B16?
5. Thank you.
6. If I would like to have also lights dimming capabilities on the lights controlled by KC868-A16v3 what boards/setup could I use from Kincony?
Thanks,
Erazer