04-07-2025, 07:06 PM
Hi,
i have succefully integrate board A16V3 via MQTT auto discovery to Homeassistant. But i didnt found how can i add now KC868-HAv2. If i create new device in ESPHome and copy data from github:
https://github.com/hzkincony/esphome-kc868-ha
I cant install it, ESP gives me error:
Failed config
'esphome' section missing from configuration. Please make sure your configuration has an 'esphome:' line in it.
Do i also need to add main board A16V3 to ESP home and just add those lines to config file of A16V3, or can KC868-HAv2 be add as standalone?
i have succefully integrate board A16V3 via MQTT auto discovery to Homeassistant. But i didnt found how can i add now KC868-HAv2. If i create new device in ESPHome and copy data from github:
https://github.com/hzkincony/esphome-kc868-ha
I cant install it, ESP gives me error:
Failed config
'esphome' section missing from configuration. Please make sure your configuration has an 'esphome:' line in it.
Do i also need to add main board A16V3 to ESP home and just add those lines to config file of A16V3, or can KC868-HAv2 be add as standalone?