12-09-2025, 09:16 AM
(This post was last modified: 12-09-2025, 09:48 AM by danielyoud401@gmail.com.)
According to Kincony Smart Board Controller, version is 1.2.7
I have the Home Assistant issue solved, in your YAML Demo config file, there is a space after the value template for COLB-A1 Value Template. I have removed this and now am seeing the transmitted data on the COLB-A1 Entity.
I now have found an issue with the mainboard parameters. Whenever the COLB loses power, the Mainboard parameters return to F Temperature, Analogy Variation of 1.00V, and Auto Send 10 Seconds. I need Analogy Variation of 0.01V and Auto Send 1 Second. When I configure these and save everything works well, but once i cycle power to the board they return to these settings and will not give enough sensitivity to the sensors I am using. How can I get these settings to be default in the Mainboard parameters.
I have the Home Assistant issue solved, in your YAML Demo config file, there is a space after the value template for COLB-A1 Value Template. I have removed this and now am seeing the transmitted data on the COLB-A1 Entity.
I now have found an issue with the mainboard parameters. Whenever the COLB loses power, the Mainboard parameters return to F Temperature, Analogy Variation of 1.00V, and Auto Send 10 Seconds. I need Analogy Variation of 0.01V and Auto Send 1 Second. When I configure these and save everything works well, but once i cycle power to the board they return to these settings and will not give enough sensitivity to the sensors I am using. How can I get these settings to be default in the Mainboard parameters.