12-10-2025, 10:42 PM
1. it's ok, just all products connect to same router by network cable.
2. sure, you can download KCS firmware.
3. you don't need to add RS485 cable. if all boards integrated to home assistant, they can communication with each other, they manager by home assistant. any controller's INPUT can trigger any controller's OUTPUT.
4. KC868-AP use by KCS v2 firmware, here is download link: https://www.kincony.com/forum/attachment.php?aid=8769
just KCS v3 can integrate to home assistant by mqtt auto discovery. KCS v2 need config mqtt yaml manually. Or you can download firmware by ESPHome yaml.
5. only need to download KCS firmware, then you can directly to use all boards.
2. sure, you can download KCS firmware.
3. you don't need to add RS485 cable. if all boards integrated to home assistant, they can communication with each other, they manager by home assistant. any controller's INPUT can trigger any controller's OUTPUT.
4. KC868-AP use by KCS v2 firmware, here is download link: https://www.kincony.com/forum/attachment.php?aid=8769
just KCS v3 can integrate to home assistant by mqtt auto discovery. KCS v2 need config mqtt yaml manually. Or you can download firmware by ESPHome yaml.
5. only need to download KCS firmware, then you can directly to use all boards.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/
Online Store: https://shop.kincony.com
Alibaba Store: https://kincony.en.alibaba.com/