New DIY Project Support

[ahmed]

please revise something wrong i made

esphome:
  name: a16
  platform: ESP32
  board: esp32dev


# Example configuration entry for ESP32
i2c:
  sda: 4
  scl: 5
  scan: true
  id: bus_a


# Example configuration entry
ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0

  # Optional manual IP
  manual_ip:
    static_ip: 192.168.1.199
    gateway: 192.168.1.1
    subnet: 255.255.255.0


# Example configuration entry
pcf8574:
  - id: 'pcf8574_hub_out_1'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_2'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_3'  # for output channel 1-8
    address: 0x24

  - id: 'pcf8574_hub_out_4'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_5'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_6'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_7'  # for output channel 1-8
    address: 0x24

  - id: 'pcf8574_hub_out_8'  # for output channel 1-8
    address: 0x24
   
  - id: 'pcf8574_hub_out_9'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_10'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_11'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_12'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_13'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_14'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_15'  # for output channel 9-16
    address: 0x25
   
  - id: 'pcf8574_hub_out_16'  # for output channel 9-16
    address: 0x25


  - id: 'pcf8574_hub_in_1'  # for input channel 1-8
    address: 0x21
   
  - id: 'pcf8574_hub_in_2'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_3'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_4'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_5'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_6'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_7'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_8'  # for input channel 1-8
    address: 0x21

  - id: 'pcf8574_hub_in_9'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_10'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_11'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_12'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_13'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_14'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_15'  # for input channel 9-16
    address: 0x22
   
  - id: 'pcf8574_hub_in_16'  # for input channel 9-16
    address: 0x22

# Individual outputs
switch:
  - platform: gpio
    name: "light1"
    pin:
      pcf8574: pcf8574_hub_out_1
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light2"
    pin:
      pcf8574: pcf8574_hub_out_2
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light3"
    pin:
      pcf8574: pcf8574_hub_out_3
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light4"
    pin:
      pcf8574: pcf8574_hub_out_4
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light5"
    pin:
      pcf8574: pcf8574_hub_out_5
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light6"
    pin:
      pcf8574: pcf8574_hub_out_6
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light7"
    pin:
      pcf8574: pcf8574_hub_out_7
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false
     
  - platform: gpio
    name: "light8"
    pin:
      pcf8574: pcf8574_hub_out_8
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false

  - platform: gpio
    name: "light9"
    pin:
      pcf8574: pcf8574_hub_out_9
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false

binary_sensor:
  - platform: gpio
    name: "input1"
    pin:
      pcf8574: pcf8574_hub_in_1
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input2"
    pin:
      pcf8574: pcf8574_hub_in_2
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input3"
    pin:
      pcf8574: pcf8574_hub_in_3
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input4"
    pin:
      pcf8574: pcf8574_hub_in_4
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input5"
    pin:
      pcf8574: pcf8574_hub_in_5
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input6"
    pin:
      pcf8574: pcf8574_hub_in_6
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input7"
    pin:
      pcf8574: pcf8574_hub_in_7
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false
     
  - platform: gpio
    name: "input8"
    pin:
      pcf8574: pcf8574_hub_in_8
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false

  - platform: gpio
    name: "input9"
    pin:
      pcf8574: pcf8574_hub_in_9
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: INPUT
      inverted: false

# Enable logging
logger:

# Enable Home Assistant API
api: