08-10-2022, 03:35 AM
H32B testing on load with terminal switchboard.
After testing on dumy lisd before installing it, it is installed and connected to the load.
Unfortunetly kbox that was working before and communicate through kincony server it is not, remote control respond very slow to switch on /off and strange
Press button 1 load 1 is on, press button 2 load 2 on and load 1 off, only odd numbers can switch on in sequence !!
And all load that i succeed to put on after less than minute switch off automatically.
I reset the H32B , and 2 remotes and paired them again the same issue, all outdoor lighting and security light off and stayed all night in dark.
I followed your video for configure the H32B to the same ip of server 192.168.1.8 and mqtt for ethernet static and wifi mqtt DHPC i got error, revised several times until i got it successiful and valid configuration on config.yaml and start it but failed to configure it on dashboard as add a card and the same for Kbox.
After this step the ethernet has been disconnected and all house appliences failed to get ip address only few wifi mobiles and was not stable, until now don't know the reson behined this!!!
Can you please resolve this ASAP since it is emergency and i felt very frusterated after few difficult days of breaking walls installing the new DB replacing the old automation system.
You quick response with Anydesk remote sharing ASAP are highly appriciated.
Gus any experience for something like this happened with H32B ?
Feed back, other experiences are highly appriciated.
After testing on dumy lisd before installing it, it is installed and connected to the load.
Unfortunetly kbox that was working before and communicate through kincony server it is not, remote control respond very slow to switch on /off and strange
Press button 1 load 1 is on, press button 2 load 2 on and load 1 off, only odd numbers can switch on in sequence !!
And all load that i succeed to put on after less than minute switch off automatically.
I reset the H32B , and 2 remotes and paired them again the same issue, all outdoor lighting and security light off and stayed all night in dark.
I followed your video for configure the H32B to the same ip of server 192.168.1.8 and mqtt for ethernet static and wifi mqtt DHPC i got error, revised several times until i got it successiful and valid configuration on config.yaml and start it but failed to configure it on dashboard as add a card and the same for Kbox.
After this step the ethernet has been disconnected and all house appliences failed to get ip address only few wifi mobiles and was not stable, until now don't know the reson behined this!!!
Can you please resolve this ASAP since it is emergency and i felt very frusterated after few difficult days of breaking walls installing the new DB replacing the old automation system.
You quick response with Anydesk remote sharing ASAP are highly appriciated.
Gus any experience for something like this happened with H32B ?
Feed back, other experiences are highly appriciated.