Lesson9 - integrate KC868-Server to home assistant by MQTT

[admin]

because your KC868-Server ip is 192.168.1.200
your network is 192.168.100.x

you should set KC868-Server ethernet for "DHCP" mode. let it's ip became 192.168.100.x so that you can find it.
how to set :
d.) Hold on Ethernet mode button, when the [yellow and white LED] all is ON, release it, then work mode in “UDP” and IP by DHCP mode;
here is online guide details: https://www.kincony.com/how-to-use-kc868-server.html