KC868-H4 will support RELAY-KEY ?

[phil]

Hello,

has the KC868-H4 Rev. 1.1 FW-Version 1.598,
in this Version support only the signal change

Input 1 - ON
"RELAY-ALARM-1,OKRELAY-ALARM-1,OK"
"RELAY-GET_INPUT-255,254,OK

Input 1 - OFF
"RELAY-ALARM-1,OKRELAY-ALARM-1,OK"
"RELAY-GET_INPUT-255,255,OK"

the processing of the signals in Home Assistant is therefore more complex,

I have seen that the RELAY-KEY function is supported by a new firmware
RELAY-KEY-255,1,0,OK
RELAY-KEY-255,1,1,OK
Will this firmware also be available for the KC868-H4 and H8


https://www.youtube.com/watch?v=WzvKwCVTNk0&t=298s
https://community.home-assistant.io/t/32...155647/119