Login

yamaray · 01-08-2024, 04:06 PM

Hello,
I like much your local implementation of IFTTT system, the interface is quite intuitive and fast to define a rule. Now I would like to involve into the IFTTT rules, some data coming or going out via MQTT protocol, so I am wondering if there is a way to involve MQTT messages into IFTTT conditions or/and actions.
In my opinion, it would be quite interesting to provide a way to send MQTT messages according to some conditions in the device or even take some internal actions according to a value from a specific received MQTT topic.

kind regards,
Yamaray

***admin*** · 01-09-2024, 12:39 AM

sorry, MQTT not work with IFTTT command. i think you can use another way. you can config by ESPHome, it will support MQTT and IFTTT by your own setting.

a.demenev@limeup.ru · 02-03-2024, 08:46 PM

(01-09-2024, 12:39 AM)admin Wrote: sorry, MQTT not work with IFTTT command. i think you can use another way. you can config by ESPHome, it will support MQTT and IFTTT by your own setting.

Hi!
1) i have same task. Can you send some information how to do it?

2)I configure some IFTTT rules - it work fine, but i cant recieve\send any information via MQTT at all - i think instruction for MQTT connection is old - i have few errors in HA
i try this instruction: https://www.kincony.com/kc868-h32b-integ...-mqtt.html
but HA says some think like "this instruction was removed" for:
broker: 192.168.1.96
port: 1883
username: mqtt
password: 123
so my config is:

#=========KinCony A8 Ventilation=============
mqtt:
switch:
- name: 'A8_output-1'
unique_id: A8-output-1
state_topic: 'KC868_A8/B0A732862D60/state'
command_topic: 'KC868_A8/B0A732862D60/set'
payload_on: '{"relay1":{"on":1}}'
payload_off: '{"relay1":{"on":0}}'
value_template: '{{ value_json.relay1.on }}'
state_on: 1
state_off: 0

- name: 'output-2'
unique_id: output-2
state_topic: 'KC868_A8/B0A732862D60/state'
command_topic: 'KC868_A8/B0A732862D60/set'
payload_on: '{"relay2":{"on":1}}'
payload_off: '{"relay2":{"on":0}}'
value_template: '{{ value_json.relay2.on }}'
state_on: 1
state_off: 0
#======== same for channel 3-8==============

binary_sensor:
- name: 'input-1'
unique_id: input-1
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.input1.on }}'
payload_on: 1
payload_off: 0

- name: 'input-2'
unique_id: input-2
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.input2.on }}'
payload_on: 1
payload_off: 0
#============same for channel 3-8==========
sensor:
- name: 'A8_temp_ext'
unique_id: A8-temp-ext
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.sensor1.temperature }}'

- name: 'A8_temp_int'
unique_id: A8-temp-int
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.sensor2.temperature }}'

ATTENTION: "Part sensor:" i made myself, using MQTT Explorer, it may be incorrect
HA start correctly, but i have no any data

a.demenev@limeup.ru · 02-04-2024, 12:12 PM

(02-03-2024, 08:46 PM)a.demenev@limeup.ru Wrote:
(01-09-2024, 12:39 AM)admin Wrote: sorry, MQTT not work with IFTTT command. i think you can use another way. you can config by ESPHome, it will support MQTT and IFTTT by your own setting.

Hi!
1) i have same task. Can you send some information how to do it?

2)I configure some IFTTT rules - it work fine, but i cant recieve\send any information via MQTT at all - i think instruction for MQTT connection is old - i have few errors in HA
i try this instruction: https://www.kincony.com/kc868-h32b-integ...-mqtt.html
but HA says some think like "this instruction was removed" for:
broker: 192.168.1.96
port: 1883
username: mqtt
password: 123
so my config is:

#=========KinCony A8 Ventilation=============
mqtt:
switch:
- name: 'A8_output-1'
unique_id: A8-output-1
state_topic: 'KC868_A8/B0A732862D60/state'
command_topic: 'KC868_A8/B0A732862D60/set'
payload_on: '{"relay1":{"on":1}}'
payload_off: '{"relay1":{"on":0}}'
value_template: '{{ value_json.relay1.on }}'
state_on: 1
state_off: 0

- name: 'output-2'
unique_id: output-2
state_topic: 'KC868_A8/B0A732862D60/state'
command_topic: 'KC868_A8/B0A732862D60/set'
payload_on: '{"relay2":{"on":1}}'
payload_off: '{"relay2":{"on":0}}'
value_template: '{{ value_json.relay2.on }}'
state_on: 1
state_off: 0
#======== same for channel 3-8==============

binary_sensor:
- name: 'input-1'
unique_id: input-1
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.input1.on }}'
payload_on: 1
payload_off: 0

- name: 'input-2'
unique_id: input-2
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.input2.on }}'
payload_on: 1
payload_off: 0
#============same for channel 3-8==========
sensor:
- name: 'A8_temp_ext'
unique_id: A8-temp-ext
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.sensor1.temperature }}'

- name: 'A8_temp_int'
unique_id: A8-temp-int
state_topic: 'KC868_A8/B0A732862D60/state'
value_template: '{{ value_json.sensor2.temperature }}'

ATTENTION: "Part sensor:" i made myself, using MQTT Explorer, it may be incorrect
HA start correctly, but i have no any data

Hi!
i fix this problem, this config is work fine:

Code:
# KinCony A8 - Ventilation sysytem

mqtt:

  switch:

   - name: 'A8-output-1'

     unique_id: a8_output_1

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output1":{"value":true}}'

     payload_off:  '{"output1":{"value":false}}'

     value_template: '{{ value_json.output1.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-2'

     unique_id: a8_output_2

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output2":{"value":true}}'

     payload_off:  '{"output2":{"value":false}}'

     value_template: '{{ value_json.output2.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-3'

     unique_id: a8_output_3

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output3":{"value":true}}'

     payload_off:  '{"output3":{"value":false}}'

     value_template: '{{ value_json.output3.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-4'

     unique_id: a8_output_4

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output4":{"value":true}}'

     payload_off:  '{"output4":{"value":false}}'

     value_template: '{{ value_json.output4.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-5'

     unique_id: a8_output_5

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output5":{"value":true}}'

     payload_off:  '{"output5":{"value":false}}'

     value_template: '{{ value_json.output5.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-6'

     unique_id: a8_output_6

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output6":{"value":true}}'

     payload_off:  '{"output6":{"value":false}}'

     value_template: '{{ value_json.output6.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-7'

     unique_id: a8_output_7

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output7":{"value":true}}'

     payload_off:  '{"output7":{"value":false}}'

     value_template: '{{ value_json.output7.value }}'

     state_on: true

     state_off: false

   - name: 'A8-output-8'

     unique_id: a8_output_8

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     command_topic: 'KC868_A8/B0A732862D60/SET'

     payload_on:  '{"output7":{"value":true}}'

     payload_off:  '{"output7":{"value":false}}'

     value_template: '{{ value_json.output8.value }}'

     state_on: true

     state_off: false

  binary_sensor:

   - name: 'A8-input-1'

     unique_id: a8_input_1

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input1.value }}'

     payload_on: on

     payload_off: off

   - name: 'A8-input-2'

     unique_id: a8_input_2

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input2.value }}'

     payload_on: on

     payload_off: off

   - name: 'A8-input-3'

     unique_id: a8_input_3

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input3.value }}'

     payload_on: true

     payload_off: false

   - name: 'A8-input-4'

     unique_id: a8_input_4

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input4.value }}'

     payload_on: true

     payload_off: false

   - name: 'A8-input-5'

     unique_id: a8_input_5

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input5.value }}'

     payload_on: true

     payload_off: false     

   - name: 'A8-input-6'

     unique_id: a8_input_6

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input6.value }}'

     payload_on: true

     payload_off: false

   - name: 'A8-input-7'

     unique_id: a8_input_7

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input7.value }}'

     payload_on: true

     payload_off: false

   - name: 'A8-input-8'

     unique_id: a8_input_8

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.input8.value }}'

     payload_on: true

     payload_off: false

  sensor:  

   - name: 'A8-temp-ext'

     unique_id: a8_temp_ext

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.sensor1.temperature }} '

     unit_of_measurement: '°C'

   - name: 'A8-temp-int'

     unique_id: a8_temp_int

     state_topic: 'KC868_A8/B0A732862D60/STATE'

     value_template: '{{ value_json.sensor2.temperature }}'

     unit_of_measurement: '°C'

#==============END Kincony A8==========

***admin*** · 02-04-2024, 01:10 PM

Yes, The new version of home assistant has changed its syntax.

a.demenev@limeup.ru · 02-04-2024, 01:25 PM

(02-04-2024, 01:10 PM)admin Wrote: Yes, The new version of home assistant has changed its syntax.

Yes, that's what I thought.
I spent more than 10 hours to found solution - i am just a beginner user of Home Assistant and KinCony

Please, update your documentation - i think it will be usefull for other people

***admin*** · 02-04-2024, 01:39 PM

you can see this topic: https://www.kincony.com/forum/showthread.php?tid=1998

a.demenev@limeup.ru · 02-04-2024, 03:03 PM

(02-04-2024, 01:39 PM)admin Wrote: you can see this topic: https://www.kincony.com/forum/showthread.php?tid=1998

Yes, i saw it, but syntax is different
that's was a problem

Login
Username:
Password:	Lost Password?
	Remember me