Loxone KC868-A8

[StuffMan]

Any special firmware for Loxone integration with the KC868-A8 board?

[admin]

here is config ESPHome component for Loxone: https://github.com/hzkincony/esphome-loxone
here is video tour how to do : https://www.youtube.com/watch?v=yj-tDb4gRa0

[jviheavy]

Hello

Integration with Loxone?

Please could you send the link or explain how do it?

Best regards

---

I'm watching the ESPHome integration with Loxone, thanks

[admin]

just do as video , the Loxone component made for ESPHome use UDP command.

[jviheavy]

Is better and easy if works with your software...with KC v2.2.2
The relay output I can control...but not the inputs and sensors
Do you have a template for it?
Best regards

---

With the UDP Monitor I find to detect the sensor and state...
But I can find the DS18B20 sensor in UDP
How I can read the sensor please?

[admin]

maybe in furture, we will update KCS firmware to support Loxone by UDP.

[jviheavy]

Now works with Loxone by UDP (inputs and outputs), But I can't read the sensor DS18B20
I can read in the KCS Firmware
How I can read the sensor by UDP? or Modbus? or TCP?

[admin]

yes, Loxone component for ESPHome not added the sensor, maybe in furutre can add that.
now you can read sensor by HTTP command, Loxone support integrate by HTTP.

[jviheavy]

How I can read by Http?
I'm checking the manual and don't find
Please could you give me the link http
Thanks

[jviheavy]

I find it

Activate HTTP Server - secret: abcd

And then link:

http://192.168.1.133/ctrl.cgi?cmd=get_se...ecret=abcd

Now I will TRY integrate in Loxone