Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A8 lost network connection via LAN
#11
This is strange. If you want, we can re send you a new KC868-A4 board (if you bought A4 from KinCony Official Aliexpress online store)
Reply
#12
This is strange.
 
I agree. in same time A16S work properly via lan all time.
 

If you want, we can re send you a new KC868-A4 board (if you bought A4 from KinCony Official Aliexpress online store)
-i have problems with A8, not A4

Unfortunately, i bought it not in official store

my be this happens because i read data from A8 very often? in fact i read data every 5 seconds to control temperature and valve state

if you can connect to me by Anydesk i can show you my stream in NodeRed 

may be you can show me another way?
Reply
#13
if you download KCS firmware, use by MQTT, then you disable all others protocol.
you can test work without Node-Red for one day. such as every some hours later, you login with board's ip address.
Reply
#14
(03-11-2024, 10:08 AM)admin Wrote: if you download KCS firmware, use by MQTT, then you disable all others protocol.
you can test work without Node-Red for one day. such as every some hours later, you login with board's ip address.

i am using MQTT to read data and TCP server to send command to switch on or off relay

you can test work without Node-Red for one day. such as every some hours later, you login with board's ip address.

ок, will try
Reply


Forum Jump:


Users browsing this thread: