Hi,
My KC868A16s is connected to internet with LAN port, WIFI off (LAN IP 192.168.1.200, mask 255.255.255.0, Gateway 192.168.1.1).
It get the Board time to internet, no problem, so I think the KC is really connected to internet, it is not behind a firewall.
In custom protocol, I create Custom1, with :
"routeur = HTTP POST", "HEX : Empty", "Message :Empty" and "URL(Otional)= https://xxxx.synology.me/api/webhook/Tem...AT_G_21deg", this url is my webhook that is open on internet
With a Pc connected to internet, in chrome this url turn on my webhook on my home assistant (boolean ON), but if I run the custom1 in IFFTT, I get "success" on KC but in reality Nothing appears to my home assistant.
An other isue, when I run this custom protocol, I loose the connection to the board, so I must reboot the board to local access to the web interface !
I think I have an issue to configure this custom protocol.
Can you help me ?
Thanks.
My KC868A16s is connected to internet with LAN port, WIFI off (LAN IP 192.168.1.200, mask 255.255.255.0, Gateway 192.168.1.1).
It get the Board time to internet, no problem, so I think the KC is really connected to internet, it is not behind a firewall.
In custom protocol, I create Custom1, with :
"routeur = HTTP POST", "HEX : Empty", "Message :Empty" and "URL(Otional)= https://xxxx.synology.me/api/webhook/Tem...AT_G_21deg", this url is my webhook that is open on internet
With a Pc connected to internet, in chrome this url turn on my webhook on my home assistant (boolean ON), but if I run the custom1 in IFFTT, I get "success" on KC but in reality Nothing appears to my home assistant.
An other isue, when I run this custom protocol, I loose the connection to the board, so I must reboot the board to local access to the web interface !
I think I have an issue to configure this custom protocol.
Can you help me ?
Thanks.