communication between 2 boards

[guycaluwaerts]

I have kc868-A16 and kc868-AP board, both connected with ethernet cable to the router. Both has their own IP-address.

Is it possible without using homeassistant to have an input on one board to control an output on the other board ?

With a long push on a button on input 1 from board KC868-A16, all outputs on KC868-a16 and KC868-AP has to go OFF.

Is this possible ? I cannot find an example in the description how to do this.

[admin]

sure, they can work without home assistant. just download KCS firmware, use by IFTTT create AUTOMATION. send customize protocol to different board. Here is KCS v2 firmware online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

[guycaluwaerts]

In the link you mentioned, I cannot find the information. Is it possible to give an example how to do this ?
I have seen on the forum that others also asked this but they also didn't receive an satified answer with an example.

So please provide us with an example

[admin]

this is sample video tour: https://youtu.be/UumHtpZiURY