04-14-2025, 07:57 PM
Dear KinCony Team,
I'm writing to apply for a free sample of your KC868 series devices.
I recently purchased a KC868-A6 v1.3SP board to evaluate its capabilities and begin developing a dedicated monitoring and automation platform for KinCony hardware. However, I encountered an issue during firmware upload: although the board is detected via USB and the LED turns on, it is not properly recognized by the SPDownload tool. As a result, I was unable to flash the firmware successfully.
I tested multiple data-capable cables and ensured no sensors or external loads were connected, but the issue persisted. Therefore, I would like to test the same custom firmware on another KC868-A6 board to verify whether the problem is hardware-related.
My main goal is to build a flexible and user-friendly platform that supports MQTT, HTTP APIs, and OTA updates. It will feature a real-time dashboard for device monitoring, control, and automation – all optimized for KinCony products.
Additionally, I’m very interested in exploring a partnership with KinCony. I believe your hardware combined with our software platform has great potential in the smart building and industrial automation market. If possible, I’d also like to discuss OEM opportunities where we can brand and distribute the solution together in our region.
Looking forward to your reply and the possibility of working together.
Best regards,
Lucas Mendes.
Dev/Owner
dw360.io
I'm writing to apply for a free sample of your KC868 series devices.
I recently purchased a KC868-A6 v1.3SP board to evaluate its capabilities and begin developing a dedicated monitoring and automation platform for KinCony hardware. However, I encountered an issue during firmware upload: although the board is detected via USB and the LED turns on, it is not properly recognized by the SPDownload tool. As a result, I was unable to flash the firmware successfully.
I tested multiple data-capable cables and ensured no sensors or external loads were connected, but the issue persisted. Therefore, I would like to test the same custom firmware on another KC868-A6 board to verify whether the problem is hardware-related.
My main goal is to build a flexible and user-friendly platform that supports MQTT, HTTP APIs, and OTA updates. It will feature a real-time dashboard for device monitoring, control, and automation – all optimized for KinCony products.
Additionally, I’m very interested in exploring a partnership with KinCony. I believe your hardware combined with our software platform has great potential in the smart building and industrial automation market. If possible, I’d also like to discuss OEM opportunities where we can brand and distribute the solution together in our region.
Looking forward to your reply and the possibility of working together.
Best regards,
Lucas Mendes.
Dev/Owner
dw360.io