M30 configure yaml for ESPhome

[stephane]

what power value in KCS monitor webpage? whether correct?

Same situation on the webpage...

---

On the LOGs there are some warnings, that appear every 2 seconds:
[12:40:47][W][component:239]: Component modbus_controller took a long time for an operation (1167 ms).
[12:40:47][W][component:240]: Components should block for at most 30 ms.

end also:
[12:43:59][W][light:221]: 'M30_LED1' - Red value 1.66 is out of range [0.0 - 1.0]!
[12:43:59][W][light:222]: 'M30_LED1' - Green value -0.66 is out of range [0.0 - 1.0]!

[12:43:59][W][light:221]: 'M30_LED2' - Red value 1.80 is out of range [0.0 - 1.0]!
[12:43:59][W][light:222]: 'M30_LED2' - Green value -0.80 is out of range [0.0 - 1.0]!