Tasmota Template

[bob_tm]

Hello,
How to convert this information to Tasmota components 

Ethernet (W5500) I/O define:
  type: W5500
  clk_pin: GPIO42
  mosi_pin: GPIO43
  miso_pin: GPIO44
  cs_pin: GPIO15
  interrupt_pin: GPIO2
  reset_pin: GPIO1

?

[admin]

i have not tested w5500 with tasmota, maybe you can try as this way: https://github.com/arendst/Tasmota/discussions/18207

[bob_tm]

* Used SPI W5500
* SPI_MOSI
* SPI_MISO
* SPI_CLK
* SPI_RST = Tasmota ETH_POWER
* SPI_IRQ = Tasmota ETH_MDIO
* SPI_CS = Tasmota ETH_MDC

execute command EthType 8 to select W5500.

tnx. works!

[admin]

ok, good.

[Ndogo]

please add v3 template like this https://templates.blakadder.com/kincony_KC868-A16.html