Lesson29- How to use tasmota for KC868-A8 via PCF8574 IIC extend GPIO

[admin]

i think you have not done config the setting for ethenret, see video begin time 06:24

here is setting for ethenret, maybe you have not done this step. if add this, ethernet will be enabled.

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}