Lesson29- How to use tasmota for KC868-A8 via PCF8574 IIC extend GPIO

[JulienR]

i think you have not done config the setting for ethenret, see video begin time 06:24

here is setting for ethenret, maybe you have not done this step. if add this, ethernet will be enabled.

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}

I've done this, after validate : ethernet is blinking, but no ip adress on logs : look at my previous logs ! No clue of ethernet activities. If I switch off access point, no ethernet IP address.
Have you tried with your A8 ?