Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lesson29- How to use tasmota for KC868-A8 via PCF8574 IIC extend GPIO
#21
ok, when have development news, i will tell you.
Reply
#22
(04-04-2022, 12:20 PM)admin Wrote: ok, when have development news, i will tell you.

any news ?
Reply
#23
developing, it need time.
Reply
#24
https://www.kincony.com/forum/showthread.php?tid=1843 here is sample code for WiFi mqtt. You can modify or update it.
Reply
#25
Reply
#26
Thanks for this tutorial.
I followed each and every step and It really worked.
Reply
#27
(11-15-2021, 01:24 AM)admin Wrote: Thanks for "blakadder" from https://blakadder.com supply the tasmota firmware BIN file for KC868-A8
details you can see : https://blakadder.com/kincony-KC868-A8



1. download tasmota firmware for KC868-A8


2. After you get it running on your Wi-Fi network, set the template in " Configuration - Other"
copy this code:

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}

3. After applying the template you need one more configuration step. Navigate to " Configuration - Configure PCF8574 " and set the PCF8574 connected to relays to Output.

[Image: setup.jpg]

[Image: webui.jpg]


hello friend, I have a doubt, with the tasmota installed, how can I activate the relays through the pulse input? I can only activate it through the app.

(11-15-2021, 01:24 AM)admin Wrote: Thanks for "blakadder" from https://blakadder.com supply the tasmota firmware BIN file for KC868-A8
details you can see : https://blakadder.com/kincony-KC868-A8



1. download tasmota firmware for KC868-A8


2. After you get it running on your Wi-Fi network, set the template in " Configuration - Other"
copy this code:

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}

3. After applying the template you need one more configuration step. Navigate to " Configuration - Configure PCF8574 " and set the PCF8574 connected to relays to Output.

[Image: setup.jpg]

[Image: webui.jpg]

Olá pessoal , estou com uma dúvida , fiz todo processo mas não conseguir acionar os relés pela entrada de pulso , apenas pela web
Reply
#28
this rules sample will set KC868-A16 input1 toggle output1 : https://www.kincony.com/forum/showthread.php?tid=1792
you can use this way for KC868-A8, just create a rule.
Reply
#29
sto provando a far funzionare il firmware tasmota solo lan disattivando wifi,in un primo momento perdo la connessione poi dopo ore di non funzionare inizia a funzionare regolarmente
Reply
#30
maybe tasmota have some issue.
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)