updating firmware kc868-h32b

[w-w]

my unit shipped with firmware version 4.13.34

I am attempting to upload version
Relay32_V437_210907.zip

OTA seams to run for only a few seconds and does not update

Using a serial cable and the Firmware Download Tool (firmware update tool download): https://www.kincony.com/download/KC868-C...loader.zip

it detects the bootloader
downloads progress 105/105
data send complete 
then when I press Run
it says Download finished begin running.


I power cycle the device that the firmware version is not updated??
thanks

[admin]

where is say the "firmware version 4.13.34" , take a photo. i think it's your wifi module's firmware version, not controller's firmware.

[w-w]

where is say the "firmware version 4.13.34" , take a photo. i think it's your wifi module's firmware version, not controller's firmware.

---

   
   
If this is the Wi-Fi firmware how does one see the controllers firmware?

[admin]

connect ethernet cable with your controller. open IP address in web browser, then you will see it.
   

[admin]

how to update firmware, see this video tour: https://youtu.be/LLIJe9VTVq8

[w-w]

how to update firmware, see this video tour: https://youtu.be/LLIJe9VTVq8

---

   
Would’ve helped to know that I needed to hold down the ethernet button until all the lights showed in order to turn it into TCP server static mode.

It shows version H32B_V4.29
Is  Relay32_V437_210907.zip a later version , from the numbering v437 looks later than v429 ?


At least I have access to the config , I assumed wrongly this would have been part of the web page available by Wi-Fi.

[admin]

https://www.kincony.com/forum/showthread.php?tid=2343 this is the newest version V4.46
yes, large number version is newer.

[w-w]

https://www.kincony.com/forum/showthread.php?tid=2343    this is the newest version V4.46
yes, large number version is newer.

---

Relay32_V446_221013.zip  
Great that update works, thank you.

[admin]

ok