how to connect KC868 to home assistant

[eddiebullman]

Ok I have my KV868-A6 & nRF24l01 boards how do I connect it to my wifi network and home assistant as I can't find anywhere how to connect every thing together I a completely new to once I get the thin connected I mite understand it better s

[admin]

do you want nRF24L01 work with home assistant?

[Lucas35]

Connecting your KC868 to Home Assistant involves several steps. Here's a general guide, but keep in mind that specific details may vary based on your setup: 
1.Connect KC868-A6 and nRF24l01 boards physically. 
2.Configure KC868-A6 to connect to home Wi-Fi using a web interface or app. 
3.Find the IP address of KC868-A6. 
4.In Home Assistant's configuration file: switch:  - platform: kc868    host: YOUR_KC868_IP_ADDRESS 
5.Restart Home Assistant. 
6.Check and test the KC868-A6 switch in Home Assistant interface

Hope this helos, let me know how it goes

[tamibandy]

Connecting your KC868 to Home Assistant involves several steps. Here's a general guide, but keep in mind that specific details may vary based on your setup: 
1.Connect KC868-A6 and nRF24l01 boards physically. 
2.Configure KC868-A6 to connect to home Wi-Fi using a web interface or app. 
3.Find the IP address of KC868-A6. 
4.In Home Assistant's configuration file: switch:  - platform: kc868    host: YOUR_KC868_IP_ADDRESS 
5.Restart Home Assistant. 
6.Check and test the KC868-A6 switch in Home Assistant interface

Hope this helos, let me know how it goes

Can you explain a little bit more detailed this steps?

I want to use KC868-A8.
What firmware should I use for the controller?

Thanks 

[admin]

if you want use KC868-A8 integrate to home assistant, just use by ESPHome. you can download ESPHome config yaml file at here: https://www.kincony.com/forum/attachment.php?aid=1100