KC868-H32B V4.37 new firmware update

[admin]

improvement:
set every relay output momentary time separately.
       
download the ZIP file , unzip update the bin file for KC868-H32B relay controller by USB-RS232 cable.

  Relay32_V437_210907.zip (Size: 46.05 KB / Downloads: 406)
firmware update tool download: https://www.kincony.com/download/KC868-C...loader.zip

[amid.sahyoun]

Why I cannot set more than 6 relays momentary timers?

If I set more than 6 relay timers, all timers will be unselected when I save
Is that normal?

[admin]

can you take a video?

[uvrtar]

Hi, I have updated to this version, but after reset and restart of the controller the relay Nr. 3 is allways on.
It is on when I unplug it and then replug it, when I save any setting on the web config(after restart) the reley 3 turns on.

I can turn it off with a momentary switch, but after another restart the relay is again on.
I need this version, because of the multiple timers.

Thank you.

[admin]

maybe you have turn on the relay3, and use the relay state remember function.so every time you power on will recovery relay state as last time.

[uvrtar]

Hi,

before the restart of controller all relays are off.

After restart relay 3 turns on.

This was also after I uploaded the new firmware.

[admin]

do you means:
step1: turn ALL OFF relays.
step2: power off->on of controller.
step2: when startup, relay3 will be on automatic?

[uvrtar]

Yes, this is what is happening.

[uvrtar]

Is there any news for my problem? If relays are off before the restart of controller, I need it to be off. I am going to the client on friday.

Thank you.

[mfauziii]

I have done firmware updates, but seem nothing has changed. I have follow firmware updates guide from, https://www.youtube.com/watch?v=LLIJe9VTVq8: 
   

After firmware updates:
0 Software Version: 4.13.26 (2020-03-20 11:00 2M)