"KCS" v2.2.4 firmware BIN file download

[admin]

Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

v2.2.4 improment:
1. replaced new DHT sensor's driver.
2. fixed MQTT protocol format bug.

[charlesrg]

Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

v2.2.4 improment:
1. replaced new DHT sensor's driver.
2. fixed MQTT protocol format bug.

Is it possible to know more details on "MQTT Protocol format bug" ?

[admin]

Missing comma

[charlesrg]

Missing comma

I think it's an extra comma I see what you're talking about I've had to use a modifier on nodered to fix it.
When are you guys going to enable firmware update via the HTTP page ? Having to use a USB cable is not optimal

[admin]

maybe in furture will design a new way to update firmware.

[yasin]

Please check the firmware to A32M controller,to correct output number and activate inter lock.

[enochjason]

Hi, I installed V2.2.4 firmware n A6 board. I can see all inputs and outputs are working in monitior web page. However, When I short Digital inputs 1-6 with ground, the relays are not turning ON. Could you please help fixing this issue?

[admin]

Hi, I installed V2.2.4 firmware n A6 board. I can see all inputs and outputs are working in monitior web page. However, When I short Digital inputs 1-6 with ground, the relays are not turning ON. Could you please help fixing this issue?

it's not a issue. you should create IFTTT command on "IFTTT" webpage, let INPUT trigger with OUTPUT. please see online guide at here: https://www.kincony.com/esp32-kcsv2-firmware.html

[admin]

Please check the firmware to A32M controller,to correct output number and activate inter lock.

updated new firmware at here: https://www.kincony.com/forum/showthread.php?tid=6870