A32 Pro

[fdcemb5]

I have flashed the A32 Pro with Kincony firmware and signed in, enabled auto-discovery, but I cannot see the device in Home Assistant. Is there any additional step required to integrate the A32 Pro with Home Assistant?

[admin]

take your A32Pro setting screen photo.

[fdcemb5]

take your A32Pro setting screen photo.

Attached are the screenshots

[admin]

please input the port 1883, the color is grey, so it not used.
   

[fdcemb5]

I have inserted the port number, but I am unable to see A32 Pro in HA. How does the auto-recovery work

[admin]

you have input mqqt://192.168.x.x
you should input mqtt://192.168.x.x
it's "mqtt", not "mqqqt", please see carefully.

[fdcemb5]

you have input mqqt://192.168.x.x
you should input mqtt://192.168.x.x
it's "mqtt", not "mqqqt", please see carefully.

I have done all the above, but can still not see A32 Pro HA. I have also cleared the Cache. Is there any other thing I can do, or can I discover it mannually?

[fdcemb5]

you have input mqqt://192.168.x.x
you should input mqtt://192.168.x.x
it's "mqtt", not "mqqqt", please see carefully.

I have done all the above, but can still not see A32 Pro HA. I have also cleared the Cache. Is there any other thing I can do, or can I discover it manually?

I have sorted it out, and A32 Pro is now discoverable at MQTT entries

[admin]

ok, good.

[fdcemb5]

I have an error from HA coming from A32Pro. Picture attached